Set the SCSI ID to 0, pull all three ID jumpers off.
You want termination enabled, might have to find
termination resistor packs if the drive is older.
If the resistors are missing you can get a passthrough
terminator to plug between the drive and cable.
You'll also want to set the drive to provide
termination power to the bus and to itself.
(Never have more than two devices providing
termination power to the bus. One internal and
one external, if any, is fine.)
If you can get the manufacturer and model number
off the drive to post here, someone should be able
to come up with the exact settings for it.
=====
"The earth swarms with inhabitants. Why then should nature,
which is fruitful to an excess here, be so very barren in
the rest of the planets?" Bernard de Fontenelle, 1686
[EMAIL PROTECTED]
My ICQ# 16024947
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
--
Vintage Macs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml>
The FAQ: <http://macfaq.binhost.com/>
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
