On Monday, December 1, 2003, at 02:18 PM, Harbourmaster wrote:
The problem:
==========
Created a RAID 0 (striped) partition using the two wide hd on the JackHammer. On re-start, the machine hangs (no bong, no smiley face, mouse pointer only).
A grey screen with only the cursor on boot is a sure sign of a SCSI termination problem.
You need to go back and double check your drives for correct SCSI ID's and correct termination.
Ken, I've set the drives on the JackHammer to get power from the bus, and the last one to provide termination. I believe it's correct. If I delete the stripe and replace it with simple partitions, both drives mount correctly, and have run a long test on the drives with no errors.
It's only if I try to mount a striped array that I get a problem.
Since this is the only reason (I can tell) for wanting to use FWB HDTK I'm really thinking this s/w is a con.
John
-- Vintage Macs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
