I used CRX seats in my '63 but fabricating mounts was pretty difficult. The CRX seats are designed to be bolted directly to the floor, and the sliders are only about an inch thick. The CRX floor is contoured to rise up to give the seat its height and backwards-tilting angle. I used to lengths of aluminum C-channel to fabricate mine.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Clark Gardner Sent: October 30, 2007 11:32 AM To: Air-Cooled Volkswagen Discussion List Subject: Re: [vintagvw] VW seat interchange For what it's worth, I had some Camry seats welded to original 74 seat frames for my 74 standard beetle. They adjust, and the Camry seats base have adjustment too. They sit just a touch high, but are so much more comfortable and adjustable that I really don't mind. I'm tall and the adjustment lets me almost sit in back seat. You could do that with almost any seat. The Honda CRX seats are popular. The 73 and 74 are interchangeable at the base, but have a slightly different head rest. Neither one is comfortable. Clark ----- Original Message ---- From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> To: Air-Cooled Volkswagen Discussion List <[email protected]> Sent: Tuesday, October 30, 2007 11:48:09 AM Subject: [vintagvw] VW seat interchange Marc, Do you have any idea if a '68 Beetle high back seat would fit a '67 Ghia? Thanks, Brian ----- Original Message ----- From: "marc vellat" <[EMAIL PROTECTED]> To: "Air-Cooled Volkswagen Discussion List" <[email protected]> Sent: Sunday, October 28, 2007 12:06 AM Subject: Re: [vintagvw] Need an Undercarriage > Besides the total redesign of their mounting points, > VW also changed the basic construction of the seat - > they broke down within a few years' use (especially in > the case of large persons sitting in > them)..."horsehair" padding leaking out everywere > scarecrow-like, broken springs/frames that snagged > your trousers & legs...horrid design. > The only `73-up stock seats that held up well were the > "sports" (Recaro-like) seats used in the few > limited-edition cars produced, and they go for a > pretty penny at a wrecking yard lucky enough to have > some. Options are to modify early (German-, not > Pennsylvania-built) Rabbit seats...that takes fairly > minor alterations to their rear legs, buy aftermarket > seats like the Pro-Cars from Scat along with the > special mounting brackets they make to adapt them to > the VW floor, or to find some appropriate-width seats > (perhaps from a Honda or Subaru) and fabricate your > own mounting system to graft them in. > > `68/`69 seats had wide headrests and narrow rails, and > `71/`72 had narrow headrests and wide rails. `70 was > 1-year-only with the narrow headrests and the narrow > rails. > ...but you CAN interchange the backrest and seat > cushion parts of stock VW seats amongst `68 through > `72s. > > --- Nicholas Stokes <[EMAIL PROTECTED]> wrote: > >> Thanks a bunch Marc, I'm hoping the line on a '70 >> comes through for >> the easiest swap. >> >> Why are good '73-up seats rare? > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > _______________________________________________ > vintagvw site list > [email protected] > http://lists.sjsu.edu/mailman/listinfo/vintagvw _______________________________________________ vintagvw site list [email protected] http://lists.sjsu.edu/mailman/listinfo/vintagvw __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ vintagvw site list [email protected] http://lists.sjsu.edu/mailman/listinfo/vintagvw _______________________________________________ vintagvw site list [email protected] http://lists.sjsu.edu/mailman/listinfo/vintagvw
