You probably don't want to change the ringer with the volume buttons. So you're going to want that off. that volume in settings is the ringer/alarm volume. Set that where you want your ringer and alarms volumes to be. Everything else will at that point be controlled by the buttons on the side. Then you need to go into general settings, accessibility and then voice over. flick until you hear rotor and go in there. Add volume to the rotor and this will allow you to control your voice over volume. this allows you to have some control over the speech volume if you need your media/notifications volume louder and want your speech not so loud. This is very tricky on the iPhone 7, but fairly easy on the SE. When I had the SE I had the rotor volume set at 35. this kept voice over down where it wasn't so loud but still gave me the ability to have media/notifications at a desirable level. So I set the rotor at 35 and then used the side keys to adjust my volume.

On 1/15/2017 3:10 PM, regina alvarado wrote:
Gordon, completely not understanding, sorry. I only see one volume right below 
the heading. I assume this is for the ringer for the phone. I originally had 
that set to 100 percent and below that ringer and alerts will not be changed 
with volume buttons on off. I have now turned that back on. How do I make 
changes? Thanks.


Reggie and Lex


On Jan 15, 2017, at 1:33 PM, Gordon <[email protected]> wrote:

Phone ringer and alarm volume are together. The media volume and notifications 
volume are together. The best thing to do is to go over to settings and sounds 
and set your ringer and alarm volume using the slider and unchecking that box 
right next to the slider to only control media volume using the buttons. This 
way your ringer and alarm volume will stay where you leave it no matter how 
often you change the media volume. You can use the rotor to change the voice 
over speech volume where you can have the media volume higher and the voice 
over lower if you want. It takes a while to find the right configuration for 
your personal use, but you'll get there. It took me about a week before I got 
it right and used to it.


On 1/15/2017 12:29 PM, regina alvarado wrote:
Sooo frustrated!!!! Please can someone tell me if there is a way to make 
alarms, reminders, and other sounds but not the phone ringer, to 100 percent? I 
am still missing everything from texts to reminders because I have VO low. I 
can hear my phone ringer fine. I have ringer set to 100 percent. I have changes 
with buttons off. I called accessibility and I do not think they understood 
what I was describing. I also told him about mail and not being able to swipe 
up to read an email from the email itself. I don't think he knew about that 
either. Another source of great frustration for me!! He must be new or 
something. Might as well ask here. How do you find the beginning of an email, 
especially when threaded but even when not threaded? Please, please, please 
give me steps one by one. Thanks to anyone who can help with my frustration! 
Deeply appreciate it!



Reggie and Lex


--
The following information is important for all members of the V iPhone list.

If you have any questions or concerns about the running of this list, or if you 
feel that a member's post is inappropriate, please contact the owners or 
moderators directly rather than posting on the list itself.

Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn - you 
can reach Cara at [email protected]

The archives for this list can be searched at:
http://www.mail-archive.com/[email protected]/
--- You received this message because you are subscribed to the Google Groups "VIPhone" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/viphone.
For more options, visit https://groups.google.com/d/optout.

Reply via email to