Based on your description, there are a couple things going on. First, I need to make an assumption. On a few of the letters in contacts, there are either no, or very few contacts under the particular letter. The number would be less than 6 to 10 depending on whether the iPhone is a 5 or an earlier model.
To understand what is going on, you need to be aware of how and when the iPhone activates its interpretation algorithm for VO commands. All tap, flick, and other movement-based commands are interpreted and activated when the finger(s) are removed from the display. However, location tracking of one finger is activated when one finger touches the display and remains still for about half a second. This is very important, especially when a person is learning to use the iPhone. What inevitably happens is, the person wants to do a flick. The person touches the display. The person is thinking so hard about doing the technique properly that they hesitate for about half a second to a second (this amount of hesitation is well-known in martial arts training). The hesitation moves VO focus to the part of the display where the person happens to be barely touching the display. Before VO announces the item that is under the person's finger, the person performs the flick and removes the finger from the display. The new command interrupts the announcement of the previous command, VO performs the required action, and the new location is announced. Because VO's focus was shifted to a different position / item on the screen, the alphabetical listings announcements are apparently out of order. Yet, when the screen is checked, everything is where it is supposed to be. If you pay careful attention, you will actually notice the same thing occurring even when letters do not change. It is less noticeable in this case because the first letter is the same, and we find it much more difficult to remember all the names in a single letter. As for the headings, the display shows all letters, and the display is continuous. If a letter only has one entry, and the next letter also only has one entry, you can see several heading letters on the display at one time. If the focused letter is at the top of the display and the hesitation moves focus to the bottom of the display before the vertical flick is sent, several letters can be easily skipped. The same is true for the reverse. Finally, when horizontally flicking, the VO highlight tends to remain near the middle of the display. When an item in a list is closed, however, that item and VO tend to be placed at the top of the display. A note about touching. The display is not pressure sensitive. Barely touching the display is all that is needed. The touch can be so light that you are not sure you have touched the screen yet. The location timer activates at this point because the display does not know whether you are barely touching it or quite firmly touching it. David Chittenden, MSc, MRCAA Email: [email protected] Mobile: +64 21 2288 288 Sent from my iPhone On 26/04/2013, at 10:31, "Raul A. Gallegos" <[email protected]> wrote: > Hello all. The following is a weird problem that one of my clients is > experiencing and I am not sure how to help them. This is all in the contacts > list. From what I can tell the contacts are in alphabetical order the way the > client wants them to be. They are set up to sort by last name, first name. > And display by first name, last name. This is all good. The problem is if you > are flicking to the right and you come across the letter C the next contacts > which are displayed all start with D. Then as you keep flicking to the right > and you eventually get to the letter E, the contacts after that start with D. > I set the rotor to headings and am experiencing weirdness there as well. As I > flaked down I would hear things like a, B, H, E, F, P, H. So it is as if > things are being misread. However if I hear a letter out of turn, I touch the > screen to see what is there and the correct contact for the letter it is > supposed to be is actually displayed. This is telling me that voiceover is > actually speaking different letters in the headings for the categories but > those letters are not correct. So in my example above the G is missing. Yet > if I stop on that missplaced the letter the contacts for G are actually > spoken. I have never seen this happen before and I am not sure what to do to > fix it. At first I thought the client might have been left flicking instead > of right flicking, but that's not the case. > > --- > Sent from Raul's iPhone - (832) 554-7285. Please excuse any dictation or auto > complete errors. > > -- > You received this message because you are subscribed to the "VIPhone" Google > Group. > To search the VIPhone public archive, visit > http://www.mail-archive.com/[email protected]/. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/viphone?hl=en. > --- > You received this message because you are subscribed to the Google Groups > "VIPhone" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the "VIPhone" Google Group. To search the VIPhone public archive, visit http://www.mail-archive.com/[email protected]/. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
