Hi, I'm just getting started with virtualGL and plan on using it with turbovnc. I am lightly aware of the basic setups for X server and typically just use X11 forwarding, so I'm sorry if this is a bad question. I am doing the install, just did the yum install and now and doing the initial system configuration. I am 6.1.2 Ensure "The 3D X server has been configured to use the GPU drivers you installed above." And then a little lower... "If the 3D X server is not headless, then this can be verified by logging into the X server locally and running glxinfo."
So where are the 3D X server directions? I may or may not have that working. I have an NVIDIA card in and it seems to work with dual 4k monitors. I can get Putty to connect with X11 forwarding and get various IDE's to display, albeit very slowly, on my windows machine. But am not clear what the steps are to confirm the 3D X server is configured or what I am looking for in glxinfo. I'm not sure if you need anything in particular but just in a case... lspci -- 1:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1) less /proc/info -- Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz This will generally be on a local LAN. Thanks for any help, Jim -- You received this message because you are subscribed to the Google Groups "VirtualGL User Discussion/Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/virtualgl-users/1f2b3511-a2c5-41b7-9c04-a266d04b3097%40googlegroups.com.
