Hello,
yesterday I began to set up my asterix box with visdn since I tried chan_misdn
and zaphfc without success (choppy sound, ...). Both (misdn and ZapHfc) do
not really work on my SMP PIII-500 system, Kernel 2.6.10.
With visdn it works until now quite good, so a big thank you to Daniele
Orlandi for his great work! There are only some issues i noticed. First of
all my asterisk setup:
asterisk
+--------+
| |
+-----+ hfc_nt |
| | |
| +--------+
| | | +--------------------+
| | hft_te +-----------+ telco_ntba (ARCOR) |
| | | +----------+---------+
| +--------+ |
| |
+----+--------------------+ +------+-------------------+
| ISDN-Phone I (MSN 1111) | | ISDN-Phone II (MSN 2222) |
+-------------------------+ +--------------------------+
1) After module loading I get one time for each card :
"hfc-pci: pci-0000:00:0e.0: sync lost, pci performance too low!"
here the dmesg output:
SNIP
visdn: loading
NET: Registered protocol family 30
visdn-netdev: Netdevice gateway loading
visdn-streamport: vISDN streamport module loading
visdn-ppp: vISDN ppp gateway module loading
vts_timer_open()
hfc-4s: HFC-4S HFC-8S Driver loading
hfc-pci: HFC-S PCI A Driver loading
PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)
hfc-pci: pci-0000:00:0d.0: resetting
hfc-pci: pci-0000:00:0d.0: configured at mem 0x82120000 (0xd89c0000)
IRQ 17
PCI: Enabling device 0000:00:0e.0 (0000 -> 0003)
hfc-pci: pci-0000:00:0e.0: resetting
hfc-pci: pci-0000:00:0e.0: configured at mem 0x82120400 (0xd89d4400)
IRQ 18
hfc-pci: pci-0000:00:0d.0:st:chan[D] channel opened.
lapd: NETDEV_UP visdn0
hfc-pci: pci-0000:00:0e.0:st:chan[D] channel opened.
lapd: NETDEV_UP visdn1
lapd: TEI assigned
lapd: tei_mgmt: visdn1 TEI 86 assigned
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
hfc-pci: pci-0000:00:0e.0: sync lost, pci performance too low!
lapd: TEI assigned
lapd: tei_mgmt: visdn1 TEI 87 assigned
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
hfc-pci: pci-0000:00:0d.0: sync lost, pci performance too low!
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
hfc-pci: pci-0000:00:0e.0:st:chan[B1] channel opened.
SNAP
2) call from 1111 to 2222: - realtime audio in both directions, works fine
3) call from 2222 to 1111: - realtime audio from 2222 to 1111
- delayed audio from 1111 to 2222
4) If I pickup "ISDN-Phone I" you can hear the last frames from the last call,
befor the dialtone is audible.
Has someone experienced the same behaviar or some tips?
Best regards,
F.Heese
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
