On Thu, January 12, 2006 7:12, Anthony Walker said:
> Hi
>
> First of well done for developing this great system. Will make life with
> Asterisk and ISDN BRI's much easier.
>
> However, I am getting an error when it tries to connect the channel and
> I hope someone can help me find the issue.
>
> Here are the log entries arround the error, followed by a whole lot of
> info about the config etc to assist in debugging.
> I have tried the snapshot from Dec 16th and well as the one from Jan
> 11th, both result in the same error.
> I am using it with Asterisk 1.2.1
>
> Any asistance would be greatly appreciated.
>
> Regards
> Anthony
>
> q931 visdn0:CALL[57.I]: Got CONNECT ACKNOWLEDGE
> q931 visdn0:CALL[57.I]: call.c:3910 Timer T313 stopped
> q931 visdn0:CALL[57.I]: U8_CONNECT_REQUEST ==to==> U10_ACTIVE
> q931 visdn0:TEI[0]: Releasing message
> -- poll timeout = -1
> -- visdn_q931_connect_channel
> -- Connecting streamport to chan '000002'
> (/sys/devices/pci0000:00/0000:00:1c.0/0000:02:02.0/st0/B1)
> Jan 11 22:56:13 ERROR[5564]: chan_visdn.c:4430
> visdn_q931_connect_channel: Cannot open streamport: File exists
> -- visdn_q931_setup_complete_indication
> -- poll timeout = -1
>
>
> Fedora Core release 3 (Heidelberg)
> Linux 2.6.9-1.667smp #1 SMP
>
> /etc/udev/rules.d/30-visdn.rules
> KERNEL="cxc-control", NAME="visdn/cxc-control"
>
> KERNEL="streamport", NAME="visdn/streamport" GROUP="pbx" MODE="0660"
> KERNEL="netdev-control", NAME="visdn/netdev-control"
> KERNEL="ppp", NAME="visdn/ppp"
> KERNEL="system", NAME="visdn/timers/system", SYMLINK="visdn/timer"
>
> ll /dev/visdn
> total 0
> crw------- 1 root root 254, 1 Jan 12 00:12 cxc-control
> crw------- 1 root root 248, 0 Jan 12 00:12 netdev-control
> crw------- 1 root root 246, 0 Jan 12 00:12 ppp
> crw-rw---- 1 root pbx 247, 0 Jan 12 00:12 streamport
> lrwxrwxrwx 1 root root 13 Jan 12 00:12 timer -> timers/system
> drwxr-xr-x 2 root root 60 Jan 12 00:12 timers
> <SNIP>
Under what account it Asterisk running? And in what primary group is that
account?
--
F Peeters
PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
AMD Duron 1GHz - 1GB - * 1.2.1
2 Sweex HFC-PCI cards
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
