Hi Daniele
i have enable from * CLI: debug visdn generic/q931/921 to see what
happend when i try to call the ISDN/DECT phone i report below the log:
------------
>From 192.168.1.60:
> requested format = ulaw,
> requested prefs = (),
> actual format = ulaw,
> host prefs = (ulaw|alaw|gsm),
> priority = mine
Feb 20 17:32:54 VERBOSE[9707] logger.c: -- Executing
Dial("IAX2/300-5", "VISDN/visdn0/200") in new stack
Feb 20 17:32:54 VERBOSE[9707] logger.c: -- Calling visdn0 on VISDN/null
Feb 20 17:32:54 VERBOSE[9707] logger.c: -- Calling on interface 'visdn0'
Feb 20 17:32:54 VERBOSE[9707] logger.c: q931 visdn0:CALL[99.O]:
call.c:305 GET (1 => 2)
Feb 20 17:32:54 VERBOSE[9707] logger.c: q931 visdn0:CALL[99.O]:
chan_visdn.c:690 GET (2 => 3)
Feb 20 17:32:54 VERBOSE[9707] logger.c: q931 visdn0:CALL[99.O]:
chan_visdn.c:809 PUT (3 => 2)
Feb 20 17:32:54 VERBOSE[9707] logger.c: -- Called visdn0/200
Feb 20 17:32:54 VERBOSE[21701] logger.c: q931 visdn0:CALL[99.O]: SETUP-REQ
Feb 20 17:32:54 VERBOSE[21701] logger.c: -- poll timeout = -1
Feb 20 17:32:54 VERBOSE[21701] logger.c: --
visdn_q931_release_indication
Feb 20 17:32:54 VERBOSE[21701] logger.c: -- poll timeout = -1
Feb 20 17:32:54 VERBOSE[9707] logger.c: -- visdn_hangup
VISDN/visdn0/99.O
Feb 20 17:32:54 VERBOSE[9707] logger.c: q931 visdn0:CALL[99.O]:
chan_visdn.c:1709 PUT (2 => 1)
Feb 20 17:32:54 VERBOSE[9707] logger.c: -- visdn_hangup
VISDN/visdn0/99.O DONE
Feb 20 17:32:54 VERBOSE[9707] logger.c: == Everyone is busy/congested
at this time (1:0/0/1)
Feb 20 17:32:54 DEBUG[9707] app_dial.c: Exiting with DIALSTATUS=CHANUNAVAIL.
Feb 20 17:32:54 DEBUG[21712] chan_iax2.c: Ooh, voice format changed to 4
Feb 20 17:33:04 WARNING[9707] pbx.c: Timeout, but no rule 't' in context
'custom-visdn-2'
Feb 20 17:33:04 DEBUG[9707] chan_iax2.c: We're hanging up IAX2/300-5 now...
Feb 20 17:33:04 VERBOSE[9707] logger.c: -- Hungup 'IAX2/300-5'
-----------
As i can understand i think there is not Layer 1 activation, also if
look to the DECT BASE i have no light that show good Layer condition, if
i connect to NT1 or to another box with ZapHFC/NT the DECT Base Led is
lighting.
What suggest?
Many thanks
Dimitri
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
