Hi Daniel
i know no layer1 so no much protocol info :-) but i have try..
My visdn conf file:
I have only one ISDN HFC card set to NT: (where i can configure PmPT in
visdn?)
device-pci-0000:00:04.0
----
<netdev visdn0>
protocol lapd
role NT
tei dynamic
</netdev>
<port st0>
attribute role NT
<chan D>
connectmodule netdev visdn0
</chan>
<chan E>
connectmodule netdev visdn0 echo
</chan>
</port>
-----
visdn.conf
-----
[general]
[global]
network_role = private
tones_option = yes
outbound_called_ton = unknown
force_outbound_cli =
force_outbound_cli_ton = no
clir_mode = default_off
cli_rewriting = No
national_prefix = 0
international_prefix = 00
network_specific_prefix =
subscriber_prefix =
abbreviated_prefix =
overlap_sending = Yes
overlap_receiving = yes
autorelease_dlc = 10
call_bumping = No
[huntgroup:telco]
mode = sequential
members = visdn0
[visdn0]
network_role = private
;context = visdn0_in
context = custom-visdn
tones_option = yes
outbound_called_ton = unknown
force_outbound_cli =
force_outbound_cli_ton = no
clip_default_name = vISDN
clip_default_number = 300
clip_numbers = 300
clir_mode = default_off
overlap_sending = Yes
overlap_receiving = no
----
Zaptel.conf
----
defaultzone=it
#span=1,1,3,ccs,ami
#bchan=1-2
#dchan=3
Every Span is Disabled
----
zapata.conf
[channels]
language=it
no other things..
----
I report every file because i dont find any related doc about configure
asterisk conf file for visdn, i hope is correct.
many thanks
Dimitri
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
