Re: 2nd level test system problems

[Edward M. Martin]

Title: 2nd level test system problems

Hello Carl,         On your second level machine directory, put in some SPECIAL xxx 3270, XXX is what you expect for the console address.         Then dial in.   You can have more SPECIAL xxx 3270 for as many 3270 sessions as You want.         Am I missing the problem?   Ed Martin Aultman Health Foundation 330-363-5050 [EMAIL PROTECTED] From: VM/ESA and z/VM Discussions [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Carl Sent: Monday, October 31, 2005 3:06 PM To: VMESA-L@LISTSERV.UARK.EDU Subject: 2nd level test system problems   VM enthusiasts:    Thanks for all the answers about saving CMS for the 2nd Level system and about a disk mapping utility. Have any of you installed a 2nd level VM by using the guidelines in SC24-6115 Running Guest Operating Systems?  I am stuck after the IPL because I have no CMS available to the 2nd-level Operator user.  You nice folks told me to add an NSS of CMS using the Maint user on the 2nd-level but I cannot dial in to this system since we have no real 3270 devices here,  and since I don't have TCP/IP installed I cannot use Telnet. Any ideas on where I should go from here?  Should I forego this attempt and use the install procedure that came with our initial install from tapes (14 no less) ? Your help is appreciated, Carl Clark BCBST Please see the following link for the BlueCross BlueShield of Tennessee E-mail disclaimer:  http://www.bcbst.com/email_disclaimer.shtm