Shimon Are their other addresses on the 10.1 network other then 10.1.4.2 and 10.1.4.1?
If not just have the VSE setup as a 10.0 address instead. The users would have to change the FTP address or switch to using a DNS address. eric At 04:38 AM 11/24/2005, you wrote: >Hi, >We have a 2216 which connects the z890 to the LAN, >for both SNA and TCPIP traffic. I am supposed to set up >the OSA-Express to replace it. > >As far as the TCPIP part goes, here is the current picture: >+-----+ +------+10.0.0.9 >| VSE |------| 2216 |-----------LAN 10.0.0.x >+-----+ +------+ >10.1.4.2 10.1.4.1 > >Using OSA/SF I configured the OSA to support SNA and >TCPIP, and we have successfully connected to VTAM >from the LAN. > >Now I need to also configure TCPIP addresses on the >OSA and attach them to the VSE guest. Users on the LAN >are supposed to be able to use FTP to get files from the VSE. > >My question is, if the 2216 was acting as a router between >two different nets, how do I set this up? Will a virtual switch >help me to bridge between the 10.1 and the 10.0 networks? > >Thank you, >Shimon Eric Schadow Mainframe Technical Support www.davisvision.com ------------------------------------------------------------------------ The information contained in this communication is intended only for the use of the recipient(s) named above. It may contain information that is privileged or confidential, and may be protected by State and/or Federal Regulations. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ------------------------------------------------------------------------
