Hi Alan, Yeah, you're right. I do have a LPR EXEC on a common disk that links to TCPMAINT 592 and then invokes the module. Tried it again after accessing TCPMAINT 592 before the common disk. Command worked but printout still bad.
How come CANADIAN TCPXLBIN partially works (For example, I get all the lower case French 'a' characters ok) but for 00371252 I get none (actually they look like Greek characters with epsilons, deltas, etc...) ? The TCPXLATE translate file looks good for 00371252. Mike -----Original Message----- From: VM/ESA and z/VM Discussions [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: December 14, 2005 2:44 PM To: [email protected] Subject: Re: LPR & French Canadian characters On Wednesday, 12/14/2005 at 02:24 EST, "Horlick, Michael" <[EMAIL PROTECTED]> wrote: > Sorry , don't get it. > > My printer is defined in RSCS as IPDELOR at IP address 172.16.92.97 > > lpr (version > > LPR Level 3A0, Internal version id PQ39574 > > <mike> Ready; > > LPR FRENCH FILE A (ASYNC TRANSLATE 00370819 RSCS IPDELOR > > The option "ASYNC" was not recognized. > > Use these options: ACK, BINARY, BURST, CC, CLASS, COPIES, FILTER, > HEADER, > HOST, INDENT, JOB, JNUM, JOBNUM, LANDSCAPE, LINECOUNT, MAIL, NAME, > NOACK, > NOBINARY, NOBURST, NOCC, NOHEADER, NOPOSTSCRIPT, NOSECURE, > POSTSCRIPT, > PRINTER, TITLE, TRACE, TRANSLATE, TYPE, VERSION, or WIDTH. > > <mike> Ready(00024); > > I am reading the small chapter Chapter 29: Using Translation Tables in > manual "TCP/IP Level 3A0 Planning and Customization" > > Mike Information on the ASYNC option is in the TCP/IP User's Guide. LPR in FL3A0 became an exec and that is where the ASYNC option is handled. Perhaps you have some other LPR EXEC laying around? Alan Altmark z/VM Development IBM Endicott
