We just installed one of these on a z890 also. Their is a pretty good red book.
http://www.redbooks.ibm.com/abstracts/sg246364.html?Open OPERATOR mode is mainly for some type of z/OS console recovery support. I used the GUI on the HMC to setup a simple config. IOCP info CHPID PATH=(14),TYPE=OSC,PARTITION=LP1,PCHID=110 ETH PORT 0 OSA ICC CHPID PATH=(15),TYPE=OSC,PARTITION=LP1,PCHID=111 ETH PORT 0 OSA ICC *---------------------------------------------------------------------* * UNIT=OSA ICC CUU=0040-00B7 Path=14 * *---------------------------------------------------------------------* CNTLUNIT CUNUMBR=0040,PATH=(14),UNIT=OSC IODEVICE ADDRESS=(0040,120),CUNUMBR=(0040),UNIT=3270 *---------------------------------------------------------------------* * UNIT=OSA ICC CUU=0140-01B7 Path=15 * *---------------------------------------------------------------------* CNTLUNIT CUNUMBR=0140,PATH=(15),UNIT=OSC IODEVICE ADDRESS=(0140,120),CUNUMBR=(0140),UNIT=3270 Your PCHIDs and CHPIDS will vary eric >I am getting a brand new z890 next week and I'll be installing z/VM 5.2. > >My question is, 'What do I need to take advantage of OSA-ICC for my >consoles?'. > >Does anyone have an example of the OSA deffination they can share? >What emulator do you use on the PC ? >Is there anything else I need to know? Any gotcha's? > >Thanks > > Eric Schadow Mainframe Technical Support www.davisvision.com ------------------------------------------------------------------------ The information contained in this communication is intended only for the use of the recipient(s) named above. It may contain information that is privileged or confidential, and may be protected by State and/or Federal Regulations. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ------------------------------------------------------------------------
