Enter the CLI command "display devstate e40" to flexes.
[EMAIL PROTECTED] wrote:
Hi listers,
I cannot get my ethernet adapter to work. If I activate it it gets a sense
081c0000
IST093I ETH1XCA ACTIVE
IST380I ERROR FOR ID = L0E40000 - REQUEST: ACTLINK, SENSE: 081C0000
These are the relevant tserver's flex-es config statements (Flex-es v7)
channel(0) local # channel 0 a local channel
cu devad(0xE40,1) path(0) resource(cuSNAa) # xca For sna
cuSNAa: cu osasna # zVM Virtual CTC to local 3172 on Eth SNA
interface local(1)
options 'adapternumber=1'
device(00) osasna /dev/net1 # Ethernet Adapter
end cuSNAa
This is the ifconfig -a output to document that the adapters are not used by
unixware
lo0: flags=4049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask ff000000
inet/perf: recv size: 4096; send size: 8192; full-size frames: 1
inet/options: rfc1323
net0: flags=4043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.50 netmask ffffff00 broadcast 192.168.0.255
inet/perf: recv size: 24576; send size: 24576; full-size frames: 1
inet/options: rfc1323
ether 00:09:6b:b0:5f:ca
My tcpip connection on /dev/net2 is working well.
The ethernet adapter is a dual port intel pro/100 as you can order with the
tserver. On the apar database I had already found an apar VM61479 which
pointed to the same error message but it did not help. There is no error
message on the flex console when activating the device. I have also tested
with cu type xcasna. It got the same result.
Can anybody give me an idea what I still can do to get the sna connection
working.
Mit freundlichen Grüßen / best regards
Franz Josef Pohlen
--
Stephen Frazier
Information Technology Unit
Oklahoma Department of Corrections
3400 Martin Luther King
Oklahoma City, Ok, 73111-4298
Tel.: (405) 425-2549
Fax: (405) 425-2554
Pager: (405) 690-1828
email: stevef%doc.state.ok.us
