Hi Luca,
I am using the packages, I need max diameter values to generate a graph
with the evolution of it. I will be thankfully if you can help me with the
modification of the code.
Thank you!
Best regards,
Laurentiu
El 19/02/2012, a las 14:25, Luca Antiga <luca.ant...@orobix.com> escribió:
> Hi Laurentiu,
> I just ran your code.
>
> The sections look good, as per the attached image.
>
> By the way, I suggest you to resample the centerlines prior to generating the
> sections, like in the following (-length 5 means: use a resampling step equal
> to 5 mm - you can of course change it).
>
> vmtksurfacereader -ifile christ3_ext_sm_sm.vtp --pipe vmtkcenterlines
> -seedselector openprofiles --pipe vmtkcenterlineresampling -length 5 --pipe
> vmtkcenterlinesections -branchsectionmaxsize branchmax -branchsectionminsize
> branchmin -ofile foo.vtp
>
> Anyway, I measured the largest section manually in paraview and I got the
> same numbers (56).
>
> The issue lies with the definition of maxSize (and mainly the unfortunate
> choice of the name): maxSize is not the maximum size of the section in any
> direction, but it's the maximum distance between the "center" of the section
> (which is really the intersection of the centerline with the section) and the
> boundary - that's where 40 comes out of.
>
> I confess I had to go back and look at the code, because I myself was misled
> and thought that max section was the maximum distance of any two points in
> the section.
>
> I totally agree that there should at least be an option to chose what kind of
> max and min distance to employ.
>
> By the way, are you using a self-built vmtk or the packages? In the former
> case I could update the code quite easily.
>
> Let me know, thanks for the heads up.
>
>
> Luca
>
> <Screen Shot 2012-02-19 at 2.05.44 PM.png>
>
>
>
> On Feb 15, 2012, at 12:40 PM, Lipsa Laurentiu Mihai wrote:
>
>> Hello,
>> I am trying to get the max diameter values for a abdominal aorta
>> aneurism ( the christ3_ext_sm_sm.vtp file) along the centerline but the
>> values are not good(christ3_ext_secions.dat). The diameter max value
>> generated by vmtk it is about 40 mm and in reality it is about 56 mm. I am
>> using the vmtkcenterlinesections with branchsectionmaxsize and minsize
>> atributes as we can see in the vmtk commands file section.txt. Also it is
>> generating a few strange values (close to reality) from the line 777 to 806
>> (in christ3_ext_secion.dat) where the CenterlineSectionClosed atribute value
>> is 1(open i think).
>> I don´t know which can be the solution to this issue.
>>
>>
>> Best regards,
>> Laurentiu
>> <sections.txt><christ3_ext_secions.dat><christ3_ext_sm_sm.vtp>------------------------------------------------------------------------------
>> Virtualization & Cloud Management Using Capacity Planning
>> Cloud computing makes use of virtualization - but cloud computing
>> also focuses on allowing computing to be delivered as a service.
>> http://www.accelacomm.com/jaw/sfnl/114/51521223/_______________________________________________
>> vmtk-users mailing list
>> vmtk-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/vmtk-users
>
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
vmtk-users mailing list
vmtk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vmtk-users
