Xiaoli,
If you send the STL ｆｉｌｅ ｔｏ ｍｅ， Ｉ ｃａｎ ｔｒｙ．
Ｙｏｎｇ
________________________________
From: Xiaoli Zhang <zhang...@gmail.com>
To: vmtk-users@lists.sourceforge.net
Sent: Tuesday, August 6, 2013 9:23 PM
Subject: [vmtk-users] centerline extraction problem
I am new to vmtk and I am trying to extract centerline from CT image of the
aorta. I prepared the surface in Amira and save as stl (ASCII) format. Then I
ran vmtkcenterlines script and place a source point at inlet and a target point
at outlet. vmtk then show "computing centerline" and staying for a very long
time (>12 hours). The surface I am working on is a small file (stl size <1MB).
Anyone can help please? I can send the screenshot of the surface and stl file
if needed. Thanks.
Xiaoli
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
vmtk-users mailing list
vmtk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vmtk-users
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
vmtk-users mailing list
vmtk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vmtk-users
