> -----Original Message----- > From: jay chandra [mailto:jc9978@;india.com] > 1)if i can accomodate 1Gbps network bandwidth > and the processing speed of the machine where the server is > running is 996MHz > and the Main memory size is 510Mbytes which is supported by > VGA graphic board > and the client machine also has similar configuration > then how can i increase the display rate to 25/30 fps?
Don't forget the internal bandwidth between video memory and core memory. Not the burst-rate available but the continue bandwitdth. Remember, the video showing on the console goes from core-mem to video-mem. Then Xvnc grabs it from video-mem and handles it in core-mem. Hence it passes the entire path twice. Then, most likely, the video stream comes from disk hence a 3rd pass over the cpu-data-bus.... Thinking of this, the Xvnc might be able to blast(?) a better frame rate since it does not move it back and forth to the video-board. btw: the CPU clockrate is no identification of the processor speed if you don't specify the processor. Video processors can do a lot with that frequency, risc-processors at that speed can also do a little less and cisc processors even less. > > 2)Why is minimun of 1000ms delay is mentioned in Update > properties of server? I think it is in processing time. CBee _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
