That's not exactly I was asking for. I mean, in the same LAN as your VNC
server PC, can you use another PC to connect to it?
On the other hand, I'm surprised to see that your VPN server (gateway) is
inside the DMZ. It is normally in the firewall, no? Well, anyway.
I think you need to say more your network config. Do you have NAT to have a
one-one correspondance to every machine in the DMZ? On the other hand, if VNC
connection is working for the VPN gateway through the tunnel, don't you feel it's
logic that it doesn't work for others because they aren't gateway.
> -----Message d'origine-----
> De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Envoyi : jeudi 12 fivrier 2004 03:03
> @ : [EMAIL PROTECTED]
> Objet : RE: Screen initial problem
>
> After connected to the VPN tunnel, I can use VNC viewer to connect VNC
> server on the VPN gateway.
>
> The VPN gateway located at the DMZ, I can only VNC to this server only. I
> cannot connect to other VNC servers which also located at DMZ.
>
> The VPN vendor say no filter on the VPN Gateway, and the firewall already
> open the port UDP500 for VPN connection.
>
> Problem is VNC work fine on the VPN gateway, but get grey screen when trying
> to connect other VNC server in the Same segment and subnet (DMZ).
>
> Regards,
> Kelvin Chak
>
>
>
> -----Original Message-----
> From: Seak, Teng-Fong [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, February 11, 2004 6:24 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Screen initial problem
>
>
> Is this really related to VPN? I mean, if you try on another PC in
> the LAN as your server PC, do you still get the same problem? On the other
> hand, you have to check your VPN, for example, if it's stateful or not, or
> if there's any filter on it.
>
> Good luck
>
> > -----Message d'origine-----
> > De : [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
> > Envoyi : mardi 10 fivrier 2004 03:33
> > @ : [EMAIL PROTECTED]
> > Objet : Screen initial problem
> >
> > Dear Administrator,
> >
> > I got a VPN tunnel which can access the VNC server at home by using the
> vnc
> > client. But I found that the VNC can connect to the VNC server, however,
> the
> > screen cannot be refreshed.
> >
> > It stop at the screeen " Please wait - Initial Screen Loading", the grey
> > screen holds for a long time and terminate by itself about 15 minutes.
> > Although the screen is grey in colour, but the VNC server can accept the
> > mouse movement and accept Ctrl-alt-del command send from the VNC client.
> >
> > In short, I can say the vnc is working, but it stop in the grey screen, so
> I
> > cannot see anything.
> >
> > I am looking forward to your suggestion.
> >
> > Regards,
> > Kelvin Chak
> > Information Technology & Business Analysis Division
> > Blue Cross (Asia-Pacific) Insurance Limited
> > Tel : (852) 2163-1872
> > Fax : (852) 2163-1199
> > Email : [EMAIL PROTECTED]
_______________________________________________
VNC-List mailing list
[EMAIL PROTECTED]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list
