On Tuesday 11 July 2006 21:22, Phillips, Sophia I, GVSOL wrote: > Hi, > > I've asked this question before but never got any answers. I hope folks > may be reading now who have some ideas. We use the 4.1.1 free edition of > VNC. I have the server loaded on 2 Windows 2000 machines run as > service-mode. We connect from various Windows 2000 professional PCs. > Most of us have no problem connecting to both servers. We are > experiencing difficulties from two machines but I cannot find a setting > on these two machines that are different from the rest. > > I have an access list set on one router to limit the access to these two > servers. The 2 problem machines are definitely on this list. I can > successfully ping the servers from the 2 clients and vice versa. > > When I run VNC client on these two machines the normal prompt comes up > and I type in the IP address just as we do from all of our PCs. The > connection appears to establish and the server screen comes up but it > stays black. The screen never writes with that of the server screen. I > have tried refresh refresh screen from the VNC menu and F5 to refresh > the screen. Nothing happens. For some reason we can't get the unit > from these positions. > > We didn't have a problem connecting from these PCs when we were running > VNC 3.3. > > Does anyone have any suggestions? > > Thanks, Sophia P.
Wasn't there a problem with some windows option? Something like Quick User switching ? Anyone on the list know if this could be that problem? Jerry _______________________________________________ VNC-List mailing list [email protected] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
