My understanding of NAT is that a router must be able to associate multiple 
connections (possibly connectionless UDP conversations) between its LAN clients 
and external stations which can see only the router as a single entity.  So, if 
a UDP datagram arrives from a station on the WAN the router must be able to 
“remember” which of its clients it should be sent to.

 

Port forwarding is a fixed configuration, where a connection on a particular 
port (e.g. 5900 or 5500) is always routed to a particular client.  The most 
helpful routers allow the port to be translated, so you can connect to the 
router on port 8903 or port 8904 and the router will send the connection to 
10.0.0.3 or 10.0.0.4 respectively, while translating the port on the LAN side 
to 5900.

 

Caveat: I’m no networking guru!

 


Philip Herlihy

                
                
                
                

 

From: Dale Eshelman [mailto:[email protected]] 
Sent: 27 September 2009 00:44
To: Philip Herlihy
Cc: [email protected]
Subject: Re: No-IP and Real VNC on multiple PC's‏

 

I am familiar with the link. I just thought there was something special you 
were addressing I did not know. I do not know a router that does not have port 
forwarding.

I just thought the term "NAT" referenced something special regarding routers. 
So I guess "Net Address Translation" is the same as port forwarding.

 

On Sep 26, 2009, at 05:09 AM, Philip Herlihy wrote:





You may find this helpful:

http://portforward.com/

Philip Herlihy  


-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Dale Eshelman
Sent: 26 September 2009 02:55
To: Christopher Woods
Cc: 'Bob Grabbe'; [email protected]
Subject: Re: No-IP and Real VNC on multiple PC's‏

Can you provide an example of of the setting and location of setting  
on the router that need to take place for NAT? What must a router have  
in the settings to be a NAT router?
Thanks

On Sep 25, 2009, at 12:28 PM, Christopher Woods wrote:




 

I've done this before, although only with two pc's behind the

same router.

For example, the router is set up to forward port 5900 to

pc1, with the ip of 192.168.1.50 and port 5901 to pc 2 with

the ip of 192.168.1.51.

PC1 is set in vnc to listen on port 5900 and pc2 is set to

listen on port 5901. You set this on the connections tab of

the options for the vnc server on each pc.

If I want to connect to pc1, I run the vnc client ( from work

) to the No-ip address:5900, if I want to connect to pc2,

it's the No-ip address:5901.

 

With a good NATting router, having to change the listen ports on  

each PC

*shouldn't* be necessary, but it can make things simpler. (however  

if you're

connecting from those machines via a LAN it adds the requirement to  

specify

the port as well, which I dislike...)

 

If the 2Wire can only directly map incoming traffic to the  

equivalent port

on the internal machine, then Roberto will have to do that. As long  

as his

router supports restricted or full cone NAT and allows for differing  

local

and remote port assignments, he should only have to make his changes  

on the

router (all the LAN PCs will quite happily work with the default  

settings).

 

 

_______________________________________________

VNC-List mailing list

[email protected]

To remove yourself from the list visit:

http://www.realvnc.com/mailman/listinfo/vnc-list



Dale Eshelman
[email protected]

ShopToEarn (Dist ID 105985)
 http://www.ShopToEarn.net/DaleEshelman

MonaVie (Distr ID 1316953)
http://www.monavie.com/Web/US/en/product_overview.dhtml

The closer I get to the pain of glass in Windoz, the farther I can see  
and I see a Mac on the horizon.

_______________________________________________
VNC-List mailing list
[email protected]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list




_______________________________________________
VNC-List mailing list
[email protected]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list

 


Dale Eshelman

[email protected]

 

ShopToEarn (Dist ID 105985)

 http://www.ShopToEarn.net/DaleEshelman <http://www.ShopToEarn.net/Eshelman> 

MonaVie (Distr ID 1316953)
http://www.monavie.com/Web/US/en/product_overview.dhtml

 

The closer I get to the pain of glass in Windoz, the farther I can see and I 
see a Mac on the horizon.

 

_______________________________________________
VNC-List mailing list
[email protected]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list

Reply via email to