To get to a specific local IP, the router must support port forwarding. You
must then configure the router to forward from whatever port you are using
for VNC. The default is 5900.
Good luck.
Michael
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David Rothman
Sent: Friday, December 15, 2000 9:52 AM
To: [EMAIL PROTECTED]
Subject: Re: vnc in w2000 behind router and zonealarm
im not sure that i follow u.
locally, vnc works fine for me. all the machines are set to a local
zone and we can all view each other - no problem.
my question is how do i do this over the net? if my basement machine is
192.168.0.3 (local ip address), how do i get to it. attaching to my
cable modem's ip doesn't move me over to a specific machine in the
lan...
----- Original Message -----
From: "Gene Giannamore" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 14, 2000 2:19 PM
Subject: RE: vnc in w2000 behind router and zonealarm
> well the only way I have been able to allow other computers access to
a
> computer running the free zonealarm is to add them (IP address) to
local
> zone. then the settings for local zone are used rather than the
internet
> zone.
>
> -----Original Message-----
> From: David Rothman [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, December 14, 2000 5:35 AM
> To: [EMAIL PROTECTED]
> Subject: Re: vnc in w2000 behind router and zonealarm
>
>
> i've tried several searches of vnc and router and zonealarm....nothing
> especially useful came up....
>
>
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, December 14, 2000 8:05 AM
> Subject: Re: vnc in w2000 behind router and zonealarm
>
>
> > While you're waiting for somebody more knowledgeable to give a more
> specific answer, try entering something like
> >
> > configure near port* and zonealarm
> >
> > into alta-vista's advanced search.
> >
> >
> >
> > Date: 14.12.2000 13:48
> > To: [EMAIL PROTECTED]
> >
> >
> >
> >
> > Reply to: [EMAIL PROTECTED]
> >
> > Subject: vnc in w2000 behind router and zonealarm
> > Message text:
> >
> >
> >
> > im sure this has been discussed to death, but i havent found an
> explicit
> > reference in a quick scan...
> >
> > i want to access my machines remotely over the net. they all run
> w2000
> > or w98se. they all use a netgear rt311 router to share a cable
modem
> > and they all run zonealarm.
> >
> > i know that i have to open 58xx or 59xx in the router setup and may
> also
> > have to enable ZA to accept certain incoming requests.
> >
> > can someone please direct me to a thread to search for in deja or an
> > online reference as to how to do this?
>
> ---------------------------------------------------------------------
> > To unsubscribe, send a message with the line: unsubscribe vnc-list
> > to [EMAIL PROTECTED]
> > See also: http://www.uk.research.att.com/vnc/intouch.html
>
> ---------------------------------------------------------------------
>
> ---------------------------------------------------------------------
> > To unsubscribe, send a message with the line: unsubscribe vnc-list
> > to [EMAIL PROTECTED]
> > See also: http://www.uk.research.att.com/vnc/intouch.html
>
> ---------------------------------------------------------------------
> ---------------------------------------------------------------------
> To unsubscribe, send a message with the line: unsubscribe vnc-list
> to [EMAIL PROTECTED]
> See also: http://www.uk.research.att.com/vnc/intouch.html
> ---------------------------------------------------------------------
> ---------------------------------------------------------------------
> To unsubscribe, send a message with the line: unsubscribe vnc-list
> to [EMAIL PROTECTED]
> See also: http://www.uk.research.att.com/vnc/intouch.html
> ---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list
to [EMAIL PROTECTED]
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list
to [EMAIL PROTECTED]
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
