If there is a need to manage only a single box, the first thing that
comes to my mind is Adtran's Total Access 5000 series. The full size
chassis has 22 slots. Fill those up with FXS cards and you're looking at
528 FXS ports.
We have never had a use case where each FXS port didn't require it's own
registration info, so I can't speak to if there can be a shared
registration for the ports.
I can say, that such a thing is possible with the Adtran TA900 series
and that the two pieces of equipment are pretty similar in regards to
SIP/FXS capabilities.
On 3/21/19 8:55 AM, Ryan Delgrosso wrote:
I have found myself with a number of hospital opportunities and
servicing the staff with IP phones is a no-brainer, however there is
the need for multi-hundred room connectivity for patient room phones
and the staff mandate is to keep it analog because "ip phones there
will grow legs".
I am looking for 24+ port density with amphenol connectors, and
ideally some kind of rudimentary internal routing so i dont need to
register all 24 discreet ports and can route by some header (to or
uri) within a single registration.
Right now im looking at AudioCodes and the Sangoma Vega series. Obihai
would be my natural choice here but don't have anything that fits my
density requirements.
Any opinions on these or others I should consider. Anyone deploy these
and can speak to the experience?
Thanks in advance
-Ryan
_______________________________________________
VoiceOps mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________
VoiceOps mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/voiceops
