Ok. In dem Log ist kein Sprung sichtbar. [Jan 25 20:54:17][chn0] Adding reading to queue (value=795554.60 ts=1422219257.039) [Jan 25 20:54:18][chn1] Adding reading to queue (value=680592.00 ts=1422219258.619) [Jan 25 21:04:17][chn0] Adding reading to queue (value=795554.90 ts=1422219857.050) [Jan 25 21:04:18][chn1] Adding reading to queue (value=680592.00 ts=1422219858.639) [Jan 25 21:14:17][chn0] Adding reading to queue (value=795555.20 ts=1422220457.062) [Jan 25 21:14:18][chn1] Adding reading to queue (value=680592.00 ts=1422220458.662)
Kannst du einen Log schicken (oder eine Zeitangabe), wo ein Sprung war? > Am 26.01.2015 um 18:05 schrieb Jan Goe <jan.andr...@googlemail.com>: > > ja ich habe 2 Meter angeschlossen ( 1x für wohnung 1x für die wäremepumpe ) > > hier die config: > > --------------- > /** > * vzlogger configuration > * > * use proper encoded JSON with javascript comments > * > * take a look at the wiki for detailed information: > * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration > <http://wiki.volkszaehler.org/software/controller/vzlogger#configuration> > */ > > { > "retry" : 30, /* how long to sleep between failed requests, > in seconds */ > "daemon": true, /* run periodically */ > "foreground" : true, /* dont run in background (prevents forking) > */ > > "verbosity" : 15, /* between 0 and 15 */ > "log" : "/var/log/vzlogger.log",/* path to logfile, optional */ > > "local" : { > "enabled" : false, /* should we start the local HTTPd for > serving live readings? */ > "port" : 80, /* the TCP port for the local HTTPd */ > "index" : true, /* should we provide a index listing of > available channels? */ > "timeout" : 30, /* timeout for long polling comet requests, 0 > disables comet, in seconds */ > "buffer" : 600 /* how long to buffer readings for the local > interface, in seconds */ > }, > > "meters" : [{ > "enabled" : true, /* disabled meters will be ignored */ > "protocol" : "sml", /* use 'vzlogger -h' for list of available > protocols */ > "device" : "/dev/usb-ir-lesekopf0", > "interval": 600, > "channels": [{ > "uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157", > "middleware" : > "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php > <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>", > "identifier" : "1-0:1.8.0", > }] > > },{ > "enabled" : true, /* disabled meters will be ignored */ > "protocol" : "sml", /* use 'vzlogger -h' for list of available > protocols */ > "device" : "/dev/usb-ir-lesekopf1", > "interval": 600, > "channels": [{ > "uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf", > "middleware" : > "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php > <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>", > "identifier" : "1-0:1.8.0", > }] > }, > ]} > > --------------------------- > > 2015-01-25 23:33 GMT+01:00 Matthias Behr <mb...@mcbehr.de > <mailto:mb...@mcbehr.de>>: > Du hast 2 Meter angeschlossen, oder? Kannst du mal die ganze Config schicken? > > [Jan 25 21:14:17][mtr0] Reading: > id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=795555.20 > ts=1422220457.062 > [Jan 25 21:14:18][mtr1] Reading: > id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680592.00 > ts=1422220458.662 > > > >> Am 26.01.2015 um 06:23 schrieb Jan Goe <jan.andr...@googlemail.com >> <mailto:jan.andr...@googlemail.com>>: >> >> hallo im anhang die vzlogger.log >> >> 2015-01-25 22:16 GMT+01:00 Matthias Behr <mb...@mcbehr.de >> <mailto:mb...@mcbehr.de>>: >> Kannst du mal ein Log mitschicken? >> Die Frage ist, ob das zB durch falsches Parsen oder Bitfehler bei der >> Übertragung passiert. >> >> Gruß >> Matthias >> >> Sent from a mobile device. >> >> Am 26.01.2015 um 01:34 schrieb Nils Radde <nils.ras...@googlemail.com >> <mailto:nils.ras...@googlemail.com>>: >> >>> >>> >>> Moin zusammen, >>> >>> >>> >>> ich habe mir den Auslesekopf (USB) von Udo gekauft und möchte damit mein >>> Easymeter Q3D auslesen. >>> >>> Dieses klappt eigentlich ganz gut, nur das ich immer sehr hohe spitzen drin >>> habe. >>> >>> Sowas wie 24 MW. >>> >>> >>> >>> Wie bekomme ich diese weg. Ich schicke euch meine vzlogger conf mal mit. >>> >>> >>> >>> /** >>> >>> * vzlogger configuration >>> >>> * >>> >>> * use proper encoded JSON with javascript comments >>> >>> * >>> >>> * take a look at the wiki for detailed information: >>> >>> * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration >>> <http://wiki.volkszaehler.org/software/controller/vzlogger#configuration> >>> */ >>> >>> >>> >>> { >>> >>> "retry" : 30, /* how long to sleep between failed requests, in seconds */ >>> >>> "daemon": true, /* run periodically */ >>> >>> //"foreground" : true, /* dont run in background (prevents forking) */ >>> >>> "verbosity" : 1, /* between 0 and 15 */ >>> >>> "log" : "/var/log/vzlogger.log", /* path to logfile, optional */ >>> >>> >>> >>> "local" : { >>> >>> "enabled" : false, /* should we start the local HTTPd for serving live >>> readings? */ >>> >>> "port" : 80, /* the TCP port for the local HTTPd */ >>> >>> "index" : true, /* should we provide a index listing of available channels >>> if no UUID was requested? */ >>> >>> "timeout" : 30, /* timeout for long polling comet requests, 0 disables >>> comet, in seconds */ >>> >>> "buffer" : 600 /* how long to buffer readings for the local interface, in >>> seconds */ >>> >>> }, >>> >>> >>> >>> "meters" : [{ >>> >>> "enabled" : true, /* disabled meters will be ignored */ >>> >>> "protocol" : "d0", /* see 'vzlogger -h' for list of available >>> prot$ */ >>> >>> "device" : "/dev/usb-ir-lesekopf", >>> >>> "channels": [{ >>> >>> "uuid" : "9176b410-a273-11e4-9298-d98f4ffd1494", >>> >>> "middleware" : "http://localhost/middleware.php >>> <http://localhost/middleware.php>", >>> >>> "identifier" : "1-0:1.7.255", >>> >>> }, { >>> >>> "uuid" : "57829b20-a271-11e4-88bc-c33ce80d3bd2", >>> >>> "middleware" : "http://localhost/middleware.php >>> <http://localhost/middleware.php>", >>> >>> "identifier" : "1-0:1.8.0" >>> >>> }] >>> >>> }] >>> >>> } >>> >>> >>> >>> Danke >>> >> >> <vzlogger.log> > > Gruß Matthias Behr
smime.p7s
Description: S/MIME cryptographic signature