ich würde interval sicherheitshalber auf 0 setzen (wird sonst intern auf -1 gesetzt, kann unkritisch sein…)
Sonst schaut es auf den ersten Blick gut aus.
> Am 26.01.2015 um 20:28 schrieb Jan Goe <jan.andr...@googlemail.com>:
>
> sehr schön vielen dank,
>
> in meinen fall wenn ich z.b. alle 5 bzw 10 minuten werte vom zähler loggen
> will wäre meine config dann so richtig :
>
> -------
> "retry" : 30, /* how long to sleep between failed requests,
> in seconds */
> "daemon": true, /* run periodically */
> "foreground" : true, /* dont run in background (prevents forking)
> */
>
> "verbosity" : 15, /* between 0 and 15 */
> "log" : "/var/www/vzlogger.log",/* path to logfile, optional */
>
> "local" : {
> "enabled" : false, /* should we start the local HTTPd for
> serving live readings? */
> "port" : 80, /* the TCP port for the local HTTPd */
> "index" : true, /* should we provide a index listing of
> available channels? */
> "timeout" : 30, /* timeout for long polling comet requests, 0
> disables comet, in seconds */
> "buffer" : 600 /* how long to buffer readings for the local
> interface, in seconds */
> },
>
> "meters" : [{
> "enabled" : true, /* disabled meters will be ignored */
> "protocol" : "sml", /* use 'vzlogger -h' for list of available
> protocols */
> "device" : "/dev/usb-ir-lesekopf0",
> "aggtime": 300,
> "channels": [{
> "uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157",
> "middleware" :
> "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php
> <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>",
> "identifier" : "1-0:1.8.0",
> "aggmode": "MAX",
> }]
>
> },{
> "enabled" : true, /* disabled meters will be ignored */
> "protocol" : "sml", /* use 'vzlogger -h' for list of available
> protocols */
> "device" : "/dev/usb-ir-lesekopf1",
> "aggtime": 300,
> "channels": [{
> "uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf",
> "middleware" :
> "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php
> <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>",
> "identifier" : "1-0:1.8.0",
> "aggmode": "MAX",
> }]
> },
> ]}
>
> -------
>
> wo wäre de identifier unterschied zwischen 1-0:1.8.0 und 8.1 ?
>
> mfg
> jan
>
> 2015-01-26 12:12 GMT+01:00 Matthias Behr <mb...@mcbehr.de
> <mailto:mb...@mcbehr.de>>:
> Ah. Klar. Du hast keine Pullseq gesetzt, d.h. deine Meter schicken ihre Daten
> von alleine.
> Da du aber ein Interval von 10min gesetzt hast, laufen die Daten alle in den
> Puffer. Dort holst du alle 10min ein Telegram ab.
> Stell mal das Interval auf 1 (oder 0). Falls du nicht so viele Daten willst,
> wie die Logger schicken, musst du mittels „aggtime“ und „aggmode“ die Anzahl
> reduzieren.
>
>> Am 26.01.2015 um 19:46 schrieb Jan Goe <jan.andr...@googlemail.com
>> <mailto:jan.andr...@googlemail.com>>:
>>
>> Na klar, das problem ist die Sprünge finden immer nur statt wenn ich
>> vzlogger neu starte, um so länger vzlogger läuft um so größer wir die
>> abweichung zum zähler ein neu start von vzlogger behebt diese abweichung
>> dann meistens.
>>
>> hier ein auzzug, wo man den sprung und den neu start gut erkennen kann :
>>
>> -----
>> [Jan 26 08:45:19][chn1] compare: 1422261319015 1422261919024
>> 1422261919024.211914
>> [Jan 26 08:45:19][chn1] JSON request body: [ [ 1422261919024.211914,
>> 680616.500000 ] ]
>> [Jan 26 08:45:19][chn1] CURL: Connection #0 seems to be dead!
>> [Jan 26 08:45:19][chn1] CURL: Closing connection #0
>> [Jan 26 08:45:19][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
>> [Jan 26 08:45:19][chn1] CURL: Trying 127.0.0.1...
>> [Jan 26 08:45:19][chn1] CURL: connected
>> [Jan 26 08:45:19][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
>> [Jan 26 08:45:19][chn1] Buffer dump (size=0 keep=32): {}
>> [Jan 26 08:45:19][mtr1] Next reading in 600 seconds
>> [Jan 26 08:45:19][chn1] CURL: Sent 43 bytes..
>> [Jan 26 08:45:19][chn1] CURL: Sent '[ [ 1422261919024.211914, 680616.500000
>> ] ]' bytes
>> [Jan 26 08:45:19][chn1] CURL: upload completely sent off: 43 out of 43 bytes
>> [Jan 26 08:45:19][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:45:19][chn0] CURL: HTTP 1.1 or later with persistent connection,
>> pipelining supported
>> [Jan 26 08:45:19][chn0] CURL: Received 26 bytes
>> [Jan 26 08:45:19][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
>> [Jan 26 08:45:19][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
>> [Jan 26 08:45:19][chn0] CURL Request succeeded with code: 200
>> [Jan 26 08:45:20][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:45:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:45:21][chn1] CURL: HTTP 1.1 or later with persistent connection,
>> pipelining supported
>> [Jan 26 08:45:21][chn1] CURL: Received 26 bytes
>> [Jan 26 08:45:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
>> [Jan 26 08:45:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
>> [Jan 26 08:45:21][chn1] CURL Request succeeded with code: 200
>> [Jan 26 08:55:16][mtr0] Got 7 new readings from meter:
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=796475.80
>> ts=1422262516.184
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=796475.80
>> ts=1422262516.184
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422262516.184
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=491.00
>> ts=1422262516.184
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=282.00
>> ts=1422262516.184
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=51.00 ts=1422262516.185
>> [Jan 26 08:55:16][mtr0] Reading:
>> id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=156.00
>> ts=1422262516.185
>> [Jan 26 08:55:16][chn0] Adding reading to queue (value=796475.80
>> ts=1422262516.184)
>> [Jan 26 08:55:16][chn0] ==> number of tuples: 1
>> [Jan 26 08:55:16][chn0] compare: 1422261916165 1422262516184
>> 1422262516184.354980
>> [Jan 26 08:55:16][chn0] JSON request body: [ [ 1422262516184.354980,
>> 796475.800000 ] ]
>> [Jan 26 08:55:16][chn0] CURL: Connection #0 seems to be dead!
>> [Jan 26 08:55:16][chn0] CURL: Closing connection #0
>> [Jan 26 08:55:16][chn0] CURL: About to connect() to 127.0.0.1 port 80 (#0)
>> [Jan 26 08:55:16][chn0] CURL: Trying 127.0.0.1...
>> [Jan 26 08:55:16][chn0] Buffer dump (size=0 keep=32): {}
>> [Jan 26 08:55:16][mtr0] Next reading in 600 seconds
>> [Jan 26 08:55:16][chn0] CURL: connected
>> [Jan 26 08:55:16][chn0] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
>> [Jan 26 08:55:16][chn0] CURL: Sent 43 bytes..
>> [Jan 26 08:55:16][chn0] CURL: Sent '[ [ 1422262516184.354980, 796475.800000
>> ] ]' bytes
>> [Jan 26 08:55:16][chn0] CURL: upload completely sent off: 43 out of 43 bytes
>> [Jan 26 08:55:16][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:55:17][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:55:18][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:55:18][chn0] CURL: HTTP 1.1 or later with persistent connection,
>> pipelining supported
>> [Jan 26 08:55:18][chn0] CURL: Received 26 bytes
>> [Jan 26 08:55:18][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
>> [Jan 26 08:55:18][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
>> [Jan 26 08:55:18][chn0] CURL Request succeeded with code: 200
>> [Jan 26 08:55:19][mtr1] Got 7 new readings from meter:
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680616.50
>> ts=1422262519.044
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=680616.50
>> ts=1422262519.044
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422262519.044
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=14.00 ts=1422262519.044
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=-2.00 ts=1422262519.044
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=0.00 ts=1422262519.044
>> [Jan 26 08:55:19][mtr1] Reading:
>> id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=14.00 ts=1422262519.044
>> [Jan 26 08:55:19][chn1] Adding reading to queue (value=680616.50
>> ts=1422262519.044)
>> [Jan 26 08:55:19][chn1] ==> number of tuples: 1
>> [Jan 26 08:55:19][chn1] compare: 1422261919024 1422262519044
>> 1422262519044.300049
>> [Jan 26 08:55:19][chn1] JSON request body: [ [ 1422262519044.300049,
>> 680616.500000 ] ]
>> [Jan 26 08:55:19][chn1] CURL: Connection #0 seems to be dead!
>> [Jan 26 08:55:19][chn1] CURL: Closing connection #0
>> [Jan 26 08:55:19][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
>> [Jan 26 08:55:19][chn1] CURL: Trying 127.0.0.1...
>> [Jan 26 08:55:19][chn1] CURL: connected
>> [Jan 26 08:55:19][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
>> [Jan 26 08:55:19][chn1] Buffer dump (size=0 keep=32): {}
>> [Jan 26 08:55:19][mtr1] Next reading in 600 seconds
>> [Jan 26 08:55:19][chn1] CURL: Sent 43 bytes..
>> [Jan 26 08:55:19][chn1] CURL: Sent '[ [ 1422262519044.300049, 680616.500000
>> ] ]' bytes
>> [Jan 26 08:55:19][chn1] CURL: upload completely sent off: 43 out of 43 bytes
>> [Jan 26 08:55:19][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:55:20][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:55:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 08:55:21][chn1] CURL: HTTP 1.1 or later with persistent connection,
>> pipelining supported
>> [Jan 26 08:55:21][chn1] CURL: Received 26 bytes
>> [Jan 26 08:55:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
>> [Jan 26 08:55:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
>> [Jan 26 08:55:21][chn1] CURL Request succeeded with code: 200
>> [Jan 26 09:03:51] terminating on signal 15.
>> [Jan 26 09:03:51] Closing connections to terminate
>> [Jan 26 09:04:20] Opened logfile /var/log/vzlogger.log
>> [Jan 26 09:04:20][] ===> Start meters
>> [Jan 26 09:04:20][mtr0] Meter connection established
>> [Jan 26 09:04:20][mtr0] Meter thread started
>> [Jan 26 09:04:20][mtr0] Meter is opened. Starting channels.
>> [Jan 26 09:04:20][chn0] Logging thread started
>> [Jan 26 09:04:20][chn0] Start logging thread for volkszaehler-api. Running
>> as daemon: yes
>> [Jan 26 09:04:20][mtr0] Number of readers: 32
>> [Jan 26 09:04:20][mtr1] Meter connection established
>> [Jan 26 09:04:20][mtr0] Config.daemon: 1
>> [Jan 26 09:04:20][mtr0] Config.local: 0
>> [Jan 26 09:04:20][mtr1] Meter thread started
>> [Jan 26 09:04:20][mtr1] Meter is opened. Starting channels.
>> [Jan 26 09:04:20][chn1] Logging thread started
>> [Jan 26 09:04:20][] Startup done.
>> [Jan 26 09:04:20][chn0] Using default volkszaehler api.
>> [Jan 26 09:04:20][chn1] Start logging thread for volkszaehler-api. Running
>> as daemon: yes
>> [Jan 26 09:04:20][chn1] Using default volkszaehler api.
>> [Jan 26 09:04:20][mtr1] Number of readers: 32
>> [Jan 26 09:04:20][mtr1] Config.daemon: 1
>> [Jan 26 09:04:20][mtr1] Config.local: 0
>> [Jan 26 09:04:21][mtr1] Got 7 new readings from meter:
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=689827.40
>> ts=1422263061.162
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=689827.40
>> ts=1422263061.162
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422263061.162
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=2352.00
>> ts=1422263061.162
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=743.00
>> ts=1422263061.162
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=738.00
>> ts=1422263061.162
>> [Jan 26 09:04:21][mtr1] Reading:
>> id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=871.00
>> ts=1422263061.162
>> [Jan 26 09:04:21][chn1] Adding reading to queue (value=689827.40
>> ts=1422263061.162)
>> [Jan 26 09:04:21][chn1] ==> number of tuples: 1
>> [Jan 26 09:04:21][chn1] compare: 0 1422263061162 1422263061162.205078
>> [Jan 26 09:04:21][chn1] JSON request body: [ [ 1422263061162.205078,
>> 689827.400000 ] ]
>> [Jan 26 09:04:21][chn1] Buffer dump (size=0 keep=32): {}
>> [Jan 26 09:04:21][mtr1] Next reading in 600 seconds
>> [Jan 26 09:04:21][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
>> [Jan 26 09:04:21][chn1] CURL: Trying 127.0.0.1...
>> [Jan 26 09:04:21][chn1] CURL: connected
>> [Jan 26 09:04:21][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
>> [Jan 26 09:04:21][chn1] CURL: Sent 43 bytes..
>> [Jan 26 09:04:21][chn1] CURL: Sent '[ [ 1422263061162.205078, 689827.400000
>> ] ]' bytes
>> [Jan 26 09:04:21][chn1] CURL: upload completely sent off: 43 out of 43 bytes
>> [Jan 26 09:04:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:21][mtr0] Got 7 new readings from meter:
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=800396.40
>> ts=1422263061.707
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=800396.40
>> ts=1422263061.707
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422263061.707
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=2404.00
>> ts=1422263061.707
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=177.00
>> ts=1422263061.707
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=158.00
>> ts=1422263061.707
>> [Jan 26 09:04:21][mtr0] Reading:
>> id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=2068.00
>> ts=1422263061.707
>> [Jan 26 09:04:21][chn0] Adding reading to queue (value=800396.40
>> ts=1422263061.707)
>> [Jan 26 09:04:21][chn0] ==> number of tuples: 1
>> [Jan 26 09:04:21][chn0] compare: 0 1422263061707 1422263061707.106201
>> [Jan 26 09:04:21][chn0] JSON request body: [ [ 1422263061707.106201,
>> 800396.400000 ] ]
>> [Jan 26 09:04:21][chn0] CURL: About to connect() to 127.0.0.1 port 80 (#0)
>> [Jan 26 09:04:21][chn0] CURL: Trying 127.0.0.1...
>> [Jan 26 09:04:21][chn0] CURL: connected
>> [Jan 26 09:04:21][chn0] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
>> [Jan 26 09:04:21][chn0] CURL: Sent 43 bytes..
>> [Jan 26 09:04:21][chn0] CURL: Sent '[ [ 1422263061707.106201, 800396.400000
>> ] ]' bytes
>> [Jan 26 09:04:21][chn0] CURL: upload completely sent off: 43 out of 43 bytes
>> [Jan 26 09:04:21][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:21][chn0] Buffer dump (size=0 keep=32): {}
>> [Jan 26 09:04:21][mtr0] Next reading in 600 seconds
>> [Jan 26 09:04:22][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:22][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:23][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:23][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:24][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:24][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:25][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:25][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:26][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:26][chn1] CURL: HTTP 1.1 or later with persistent connection,
>> pipelining supported
>> [Jan 26 09:04:26][chn1] CURL: Received 26 bytes
>> [Jan 26 09:04:26][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
>> [Jan 26 09:04:26][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
>> [Jan 26 09:04:26][chn1] CURL Request succeeded with code: 200
>> [Jan 26 09:04:26][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
>> [Jan 26 09:04:27][chn0] CURL: HTTP 1.1 or later with persistent connection,
>> pipelining supported
>> [Jan 26 09:04:27][chn0] CURL: Received 26 bytes
>> [Jan 26 09:04:27][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
>> [Jan 26 09:04:27][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
>> [Jan 26 09:04:27][chn0] CURL Request succeeded with code: 200
>> ---------------
>>
>>
>> hast du eine ahnung wie man den CURL: additional stuff not fine fehler
>> beheben kann ?
>>
>> mfg
>> jan
>>
>>
>> 2015-01-26 11:23 GMT+01:00 Matthias Behr <mb...@mcbehr.de
>> <mailto:mb...@mcbehr.de>>:
>> Ok. In dem Log ist kein Sprung sichtbar.
>> [Jan 25 20:54:17][chn0] Adding reading to queue (value=795554.60
>> ts=1422219257.039)
>> [Jan 25 20:54:18][chn1] Adding reading to queue (value=680592.00
>> ts=1422219258.619)
>> [Jan 25 21:04:17][chn0] Adding reading to queue (value=795554.90
>> ts=1422219857.050)
>> [Jan 25 21:04:18][chn1] Adding reading to queue (value=680592.00
>> ts=1422219858.639)
>> [Jan 25 21:14:17][chn0] Adding reading to queue (value=795555.20
>> ts=1422220457.062)
>> [Jan 25 21:14:18][chn1] Adding reading to queue (value=680592.00
>> ts=1422220458.662)
>>
>> Kannst du einen Log schicken (oder eine Zeitangabe), wo ein Sprung war?
>>
>>> Am 26.01.2015 um 18:05 schrieb Jan Goe <jan.andr...@googlemail.com
>>> <mailto:jan.andr...@googlemail.com>>:
>>>
>>> ja ich habe 2 Meter angeschlossen ( 1x für wohnung 1x für die wäremepumpe )
>>>
>>> hier die config:
>>>
>>> ---------------
>>> /**
>>> * vzlogger configuration
>>> *
>>> * use proper encoded JSON with javascript comments
>>> *
>>> * take a look at the wiki for detailed information:
>>> * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
>>> <http://wiki.volkszaehler.org/software/controller/vzlogger#configuration>
>>> */
>>>
>>> {
>>> "retry" : 30, /* how long to sleep between failed
>>> requests, in seconds */
>>> "daemon": true, /* run periodically */
>>> "foreground" : true, /* dont run in background (prevents
>>> forking) */
>>>
>>> "verbosity" : 15, /* between 0 and 15 */
>>> "log" : "/var/log/vzlogger.log",/* path to logfile, optional */
>>>
>>> "local" : {
>>> "enabled" : false, /* should we start the local HTTPd for
>>> serving live readings? */
>>> "port" : 80, /* the TCP port for the local HTTPd */
>>> "index" : true, /* should we provide a index listing of
>>> available channels? */
>>> "timeout" : 30, /* timeout for long polling comet requests,
>>> 0 disables comet, in seconds */
>>> "buffer" : 600 /* how long to buffer readings for the
>>> local interface, in seconds */
>>> },
>>>
>>> "meters" : [{
>>> "enabled" : true, /* disabled meters will be ignored */
>>> "protocol" : "sml", /* use 'vzlogger -h' for list of available
>>> protocols */
>>> "device" : "/dev/usb-ir-lesekopf0",
>>> "interval": 600,
>>> "channels": [{
>>> "uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157",
>>> "middleware" :
>>> "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php
>>> <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>",
>>> "identifier" : "1-0:1.8.0",
>>> }]
>>>
>>> },{
>>> "enabled" : true, /* disabled meters will be ignored */
>>> "protocol" : "sml", /* use 'vzlogger -h' for list of available
>>> protocols */
>>> "device" : "/dev/usb-ir-lesekopf1",
>>> "interval": 600,
>>> "channels": [{
>>> "uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf",
>>> "middleware" :
>>> "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php
>>> <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>",
>>> "identifier" : "1-0:1.8.0",
>>> }]
>>> },
>>> ]}
>>>
>>> ---------------------------
>>>
>>> 2015-01-25 23:33 GMT+01:00 Matthias Behr <mb...@mcbehr.de
>>> <mailto:mb...@mcbehr.de>>:
>>> Du hast 2 Meter angeschlossen, oder? Kannst du mal die ganze Config
>>> schicken?
>>>
>>> [Jan 25 21:14:17][mtr0] Reading:
>>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=795555.20
>>> ts=1422220457.062
>>> [Jan 25 21:14:18][mtr1] Reading:
>>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680592.00
>>> ts=1422220458.662
>>>
>>>
>>>
>>>> Am 26.01.2015 um 06:23 schrieb Jan Goe <jan.andr...@googlemail.com
>>>> <mailto:jan.andr...@googlemail.com>>:
>>>>
>>>> hallo im anhang die vzlogger.log
>>>>
>>>> 2015-01-25 22:16 GMT+01:00 Matthias Behr <mb...@mcbehr.de
>>>> <mailto:mb...@mcbehr.de>>:
>>>> Kannst du mal ein Log mitschicken?
>>>> Die Frage ist, ob das zB durch falsches Parsen oder Bitfehler bei der
>>>> Übertragung passiert.
>>>>
>>>> Gruß
>>>> Matthias
>>>>
>>>> Sent from a mobile device.
>>>>
>>>> Am 26.01.2015 um 01:34 schrieb Nils Radde <nils.ras...@googlemail.com
>>>> <mailto:nils.ras...@googlemail.com>>:
>>>>
>>>>>
>>>>>
>>>>> Moin zusammen,
>>>>>
>>>>>
>>>>>
>>>>> ich habe mir den Auslesekopf (USB) von Udo gekauft und möchte damit mein
>>>>> Easymeter Q3D auslesen.
>>>>>
>>>>> Dieses klappt eigentlich ganz gut, nur das ich immer sehr hohe spitzen
>>>>> drin habe.
>>>>>
>>>>> Sowas wie 24 MW.
>>>>>
>>>>>
>>>>>
>>>>> Wie bekomme ich diese weg. Ich schicke euch meine vzlogger conf mal mit.
>>>>>
>>>>>
>>>>>
>>>>> /**
>>>>>
>>>>> * vzlogger configuration
>>>>>
>>>>> *
>>>>>
>>>>> * use proper encoded JSON with javascript comments
>>>>>
>>>>> *
>>>>>
>>>>> * take a look at the wiki for detailed information:
>>>>>
>>>>> * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
>>>>> <http://wiki.volkszaehler.org/software/controller/vzlogger#configuration>
>>>>> */
>>>>>
>>>>>
>>>>>
>>>>> {
>>>>>
>>>>> "retry" : 30, /* how long to sleep between failed requests, in seconds */
>>>>>
>>>>> "daemon": true, /* run periodically */
>>>>>
>>>>> //"foreground" : true, /* dont run in background (prevents forking) */
>>>>>
>>>>> "verbosity" : 1, /* between 0 and 15 */
>>>>>
>>>>> "log" : "/var/log/vzlogger.log", /* path to logfile, optional */
>>>>>
>>>>>
>>>>>
>>>>> "local" : {
>>>>>
>>>>> "enabled" : false, /* should we start the local HTTPd for serving live
>>>>> readings? */
>>>>>
>>>>> "port" : 80, /* the TCP port for the local HTTPd */
>>>>>
>>>>> "index" : true, /* should we provide a index listing of available
>>>>> channels if no UUID was requested? */
>>>>>
>>>>> "timeout" : 30, /* timeout for long polling comet requests, 0 disables
>>>>> comet, in seconds */
>>>>>
>>>>> "buffer" : 600 /* how long to buffer readings for the local interface, in
>>>>> seconds */
>>>>>
>>>>> },
>>>>>
>>>>>
>>>>>
>>>>> "meters" : [{
>>>>>
>>>>> "enabled" : true, /* disabled meters will be ignored */
>>>>>
>>>>> "protocol" : "d0", /* see 'vzlogger -h' for list of available
>>>>> prot$ */
>>>>>
>>>>> "device" : "/dev/usb-ir-lesekopf",
>>>>>
>>>>> "channels": [{
>>>>>
>>>>> "uuid" : "9176b410-a273-11e4-9298-d98f4ffd1494",
>>>>>
>>>>> "middleware" : "http://localhost/middleware.php
>>>>> <http://localhost/middleware.php>",
>>>>>
>>>>> "identifier" : "1-0:1.7.255",
>>>>>
>>>>> }, {
>>>>>
>>>>> "uuid" : "57829b20-a271-11e4-88bc-c33ce80d3bd2",
>>>>>
>>>>> "middleware" : "http://localhost/middleware.php
>>>>> <http://localhost/middleware.php>",
>>>>>
>>>>> "identifier" : "1-0:1.8.0"
>>>>>
>>>>> }]
>>>>>
>>>>> }]
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Danke
>>>>>
>>>>
>>>> <vzlogger.log>
>>>
>>>
>>
>> Gruß
>>
>> Matthias Behr
>>
>>
>
> Gruß
>
> Matthias Behr
>
>
Gruß
Matthias Behr
smime.p7s
Description: S/MIME cryptographic signature
