Also, I should mention that the Calibration Refresh procedure succeeds.

I'd expect that if the EAROM had failed or become marginal, the Calibration Refresh would fail (as I recall, the manual says something to this effect though I don't have mine here to check).

Thanks,
Phil.

On Fri, 7 Dec 2012, Rob Klein wrote:

As per Philip's original post, _all_ AC ranges drop gradually. This is really not consistent with a faulty
EAROM.

Rob.

Op 7-12-2012 13:19, Wim de Jong schreef:
Dave,

Thats the question. It depends on the quality of the cells where the AC calibration info is stored.
I'm not aware of a checksum function on these EAROM's.

If it is the AC part, I've some spare parts if necessary... Just let me know.

Kind regards, Wim.

Wim de Jong
[email protected]

Op 7-12-2012 10:25, David C. Partridge schreef:
Wim

I don't think that is likely, as Phil clearly says that all the DC ranges are correct, it is just the AC ranges that are a problem. If the EAROMs were bad, you'd lose all the calibration constants.

Dave
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Wim de Jong
Sent: 07 December 2012 08:04
To: [email protected]
Subject: [volt-nuts] Fwd: Solartron 7150plus - Chasing AC gremlins

Phil,
I suspect it to be the EAROM(s) IC 105/6 of this meter. Losing its calibration constants.
Regards, Wim.

Wim de Jong
[email protected]


_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.


_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.


_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.


--
Phil.
[email protected]
http://www.philpem.me.uk/

_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

Reply via email to