This board came from a unit that was disassembled to the module level. -John
============== > On Sat, 31 Aug 2013 06:12:39 -0700, J. Forster wrote: > >> I don't know specifically about SW revs, but: >> >> The EPROM in the 3488A is not socketed. >> >> I have the guts of a 3488A here that I bought for spares. The number on >> the EPROM label is 03488-88802. >> >> Most of the date codes on the chips are 98. >> >> If you are interested in the processor board, power supply, or >> backplane, >> drop me an email off-list. >> > > The SW REV is shown like this : > > ***** SNIP ***** > 3488A Upgrade Instructions (Installing updated 3488A Control Board that > supports 44470D and 44471D modules) > > Test for upgrade > -------------------- > Connect the power cable and power up the Agilent 3488A, press the TEST > key just below the > display window. The display â 3488A 1998â identifies that this Agilent > 3488A mainframe has > been upgraded successfully (the existing 3488A just displays â3488Aâ) > ***** SNIP ***** > > > So if the TEST key shows â 3488A 1998â , it's a "new" one > > > CFO > > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
