I checked my 3458A and it says that the Rev is 8.2. What can I infer about the unit? I have not opened it up yet to check the status of the NVRAM since I am waiting for the posidrive tools.
Randy On Sun, Sep 21, 2014 at 9:20 AM, J. L. Trantham <[email protected]> wrote: > Not in front of my meter right now but IIRC, 'Blue Key' (shift), 'R', > 'Down Arrow' until you find Rev? then hit enter. It will return something > like 7,1 or 8,2 etc. > > The first digit is the master processor firmware version and the second > number is the slave processor firmware version. The master processor > firmware is located on the A5 Board, the Outguard Controller. I'm not sure > where the slave processor firmware is located. 9,2 is the latest AFAIK. > I've heard that there is not much difference between 8 and 9. > > I don't know how to check for the Service Note Compliance. Would probably > have to read each note then explore the meter to see what is installed. > > Good luck. > > Joe > > -----Original Message----- > From: volt-nuts [mailto:[email protected]] On Behalf Of cfo > Sent: Sunday, September 21, 2014 10:22 AM > To: [email protected] > Subject: [volt-nuts] Old HP3458A - SN: 2823A 03939 > > Gents > > I'm looking for a 3458A , and have found one : SN: 2823A 03939 w. opt 002 > Seller says it's passing selftest. > > But it's an old serial# , is there any way one can verify that it has an > up-to date firmware , and maybe via that see if it has has all the needed > upgrades or ServiceNotes applied ? > > TIA > CFO > Denmark > > _______________________________________________ > volt-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
