On Mon, Jan 25, 2016 at 04:52:56PM +0000, Dr. David Kirkby (Kirkby Microwave Ltd) wrote:
> It is the same general type, but the pinout is wrong. Mine has two radial > pins, not 3. That will not fit. Sorry, I understand now it's a 2/3A, much bigger. The original LX1634 (LX16/34) is a Li-SO2, 850mAh, 2.8V nominal, 3V open circuit. Current SAFT model is "G 32/3". Here is the datasheet http://www.saftbatteries.com/force_download/G_323.pdf I saw the code "G 32/3.4" should point to the version with PCB pins, but I wasn't able to find the original datasheet and any EU source. If you can accept to change the chemistry to a Li-MnO2, you can use the Varta 06237501301 from the supplier I suggested. This is a 2/3AA, same height, thinner, with radial leads like a capacitor, so you should find the way to fit it. Another idea could be use a holder and put a (very easy to find everywhere) CR123A. Best regards, Andrea Baldoni _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
