The Wideband Source for my 4808 appeared not to be working as the 4808 said "Error 9" when I tried to use it.
While trying to work out what was wrong I checked the signals on the 15 pin cable between the 4808 and the Option 70 box. The signal on pin 9 was noticeable by its absence at the far end of the cable (this is IDIGBUSON_H which should be +5V). It tells the Opt. 70 box at the far end that the 4800 that's powered on. Once I replaced the cable the beast woke up but only produces output for 0.34MHz and above. It is silent at lower frequencies. Anyone have any ideas? Cheers Dave _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
