David wrote:
A practical problem is the tools available to me. The U-channel was machined by someone in my radio club, and the rest I made myself using nothing more than a drill and hand tools. It would be nice to make more out of one piece, but it would require better tools than I have readily available. There are certainly engineering companies that could do a better job, but it would be quite costly.
If you can make a decent drawing of what you need (it doesn't have to be a draughtsmanlike job, as long as the form and measurements are clearly shown), I bet you can find someone in your radio club, or a personal friend, or someone on a list you frequent to make it for a nominal cost (you would probably need to pay for the raw material, although I don't charge for anything that comes out of my scrap pile and this is true of many other home shop machinists). HSMs are behind every third or fourth garage door in the UK.
Another option would be to build up the parts as you have done, then have someone TIG weld the pieces together.
Best regards, Charles _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
