[email protected] writes: > mine, since it was built in 1977, has drifted upwards by 1.6ppm. > There is also a picture showing druft data of several SR104s on > eevblog, but dont have the link handy.
I don't have link either but probably this copy here: <http://ee.devereux.me.uk/SR104s.gif> > > > > >> Gesendet: Mittwoch, 29. November 2017 um 15:25 Uhr >> Von: "Electronics and Books via volt-nuts" <[email protected]> >> An: "Discussion of precise voltage measurement" <[email protected]> >> Betreff: Re: [volt-nuts] Get 10K resistor calibrated in UK >> >> can anyone tell me howmuch a SR104 10k resistor drift >> >> Met vriendelijke groeten >> Regards >> Frans >> >> [email protected] >> http://ElectronicsAndBooks.com >> Netherlands >> >> Discere ne cesses >> >> -------------------------------------------- >> On Wed, 11/8/17, David C. Partridge <[email protected]> wrote: >> >> Subject: Re: [volt-nuts] Get 10K resistor calibrated in UK >> To: "'Discussion of precise voltage measurement'" <[email protected]> >> Date: Wednesday, November 8, 2017, 4:08 PM >> >> I guess that depends on your >> definition of cheap :( >> >> Dave >> >> -----Original Message----- >> From: volt-nuts [mailto:[email protected]] >> On Behalf Of Alan Ambrose >> Sent: 08 November >> 2017 14:31 >> To: [email protected] >> Subject: Re: [volt-nuts] Get 10K resistor >> calibrated in UK >> >> NPL i.e. >> the UK national lab, are also surprising flexible and cheap. >> Looking at their schedule for '15/'16 (the one I >> happen to have to hand) they had 10K ohm cal 30-Nov-15 to >> 11-Jan-16 @ £510. They also had voltage cal October and >> March at ~£420. >> > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > -- John Devereux _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
