Lou,
I have seen it but outside Europe and in Australia the shipping and customs
costs are prohibitive, especially for items that honestly have a very low value.
Also it seems to me that the seller does not guarantee the functioning.
I would also be fine with an 8505A with AC DC options.
Luciano
Luciano P. S. Paramithiotti
[email protected]
www.timeok.it
Da "volt-nuts" [email protected]
A [email protected]
Cc
Data Wed, 02 Sep 2020 12:00:04 -0400
Oggetto volt-nuts Digest, Vol 130, Issue 2
Send volt-nuts mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of volt-nuts digest..."
Today's Topics:
1. Re: Fluke 8506A looking (Lou Amadio)
----------------------------------------------------------------------
Message: 1
Date: Wed, 2 Sep 2020 06:13:34 +1000
From: Lou Amadio <[email protected]>
To: [email protected], Discussion of precise voltage measurement
<[email protected]>
Subject: Re: [volt-nuts] Fluke 8506A looking
Message-ID:
<caju4ahdb9-+kbe12-a+z_iee3zbebejhwqsdz5f-fbjyg4k...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
There is one in Australia
https://www.ebay.com.au/itm/Fluke-8506A-Thermal-RMS-digital-multimeter/123942970490?hash=item1cdb93a47a:g:ZeIAAOSw8A1dqC5q&frcectupt=true
Lou
On Tue, Sep 1, 2020 at 9:46 PM <[email protected]> wrote:
>
> Hi,
>
> I am looking for a Fluke 8506A. I bought one on ebay but it came
> without the AC / DC thermal converter and it didn't even work in DC.
>
> I kept it for spare parts but now I want one cheap.
>
> If you have one or you know where I can go, thank you.
>
> My Agilent 34401 has quite disappointed me because in ACV it is a
> disaster in both low-level accuracy and frequency response. My Fluke 8502
> with the thrue rms converter in comparison is very flat 10Hz - 50kHz and
> over. The HP when measuring 12V for example becomes a 5 1/2 digit while
the
> Fluke remains 6 1/2 digit. So my question is: considering AC DC accuracy
> and stability what are the best 6.5 digits multimeters?
>
> have a nice day,
>
> Luciano
>
> Luciano P. S. Paramithiotti
> [email protected]
> www.timeok.it
>
> Da "volt-nuts" [email protected]
> A [email protected]
> Cc
> Data Sat, 22 Aug 2020 12:00:02 -0400
> Oggetto volt-nuts Digest, Vol 129, Issue 7
> Send volt-nuts mailing list submissions to
> [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> or, via email, send a message with subject or body 'help' to
> [email protected]
>
> You can reach the person managing the list at
> [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of volt-nuts digest..."
>
>
> Today's Topics:
>
> 1. Spade lug/Digistand 6406 manual ([email protected])
> 2. Re: Spade lug/Digistand 6406 manual (Andreas Bergmann)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 22 Aug 2020 14:35:31 +0200
> From: [email protected]
> To: [email protected]
> Subject: [volt-nuts] Spade lug/Digistand 6406 manual
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=utf-8
>
>
> Thanks to all those who have also answered me directly.(spade Lugs)
>
> At a flea market I bought two references, one for voltage and other for
> current, Digistand 6406 and 6426 respectively. I wrote to the manufacturer
> for the manuals and he sent me the one for 6426 but he told me that he did
> not find the one that interested me most , ie voltage reference 6406. I
> repaired both power supplies that had shorted electrolytic capacitors and
> for one of them I had to replace the custom power transformer.
>
> Now they both work but the voltage calibrator needs to be calibrated.
> Inside are a handful of trimmers but no indication of their function.
> Calibration is not possible without manual. Extreme ratio I want to ask
you
> if any of you have this manual.
>
> Thank you,
>
> Luciano
>
> Luciano P. S. Paramithiotti
> [email protected]
> www.timeok.it
>
> Da "volt-nuts" [email protected]
> A [email protected]
> Cc
> Data Thu, 13 Aug 2020 12:00:02 -0400
> Oggetto volt-nuts Digest, Vol 129, Issue 6
> Send volt-nuts mailing list submissions to
> [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> or, via email, send a message with subject or body 'help' to
> [email protected]
>
> You can reach the person managing the list at
> [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of volt-nuts digest..."
>
>
> Today's Topics:
>
> 1. Spade lug ([email protected])
> 2. Re: Spade lug (Lou Amadio)
> 3. Re: Spade lug (Jason Watson)
> 4. Re: Spade lug (Andreas Bergmann)
> 5. Re: Spade lug (Tom Knox)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 13 Aug 2020 10:01:22 +0200
> From: [email protected]
> To: [email protected]
> Subject: [volt-nuts] Spade lug
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=utf-8
>
>
> Hi all you,
>
> I am looking some pure Copper spade lug for metrology measurements.
>
> Up now I have not found it on the web.
>
> Can you help me?
>
> Luciano
>
> Luciano P. S. Paramithiotti
> [email protected]
> www.timeok.it
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 13 Aug 2020 19:57:16 +1000
> From: Lou Amadio <[email protected]>
> To: [email protected], Discussion of precise voltage measurement
> <[email protected]>
> Subject: Re: [volt-nuts] Spade lug
> Message-ID:
> <caju4ahcxeostc034tkwcjo6nu5v5hv3rx92x7e7kapky4pq...@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Hi Luciano
> Try the Metrology thread on the EEVBLOG forum. There were some available
> sometime ago. Post a request and you might get lucky.
> Lou
>
> On Thu, Aug 13, 2020 at 6:02 PM <[email protected]> wrote:
>
> >
> > Hi all you,
> >
> > I am looking some pure Copper spade lug for metrology measurements.
> >
> > Up now I have not found it on the web.
> >
> > Can you help me?
> >
> > Luciano
> >
> > Luciano P. S. Paramithiotti
> > [email protected]
> > www.timeok.it
> > _______________________________________________
> > volt-nuts mailing list -- [email protected]
> > To unsubscribe, go to
> > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> > and follow the instructions there.
> >
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 13 Aug 2020 08:08:24 -0400
> From: Jason Watson <[email protected]>
> To: Discussion of precise voltage measurement
> <[email protected]>
> Cc: [email protected]
> Subject: Re: [volt-nuts] Spade lug
> Message-ID:
> <cajbunwq7ccpfw3_n-adz2lh24dsga8ezugnmfwkb7jawhjl...@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> EDL also makes some you can order online. You can get just copper or
> gold
> plated over copper.
>
> https://www.edl-inc.com/Copper-Instrument-Lugs-25-Qty_p_51.html
>
> On Thu, Aug 13, 2020 at 5:58 AM Lou Amadio <[email protected]>
> wrote:
>
> > Hi Luciano
> > Try the Metrology thread on the EEVBLOG forum. There were some
> available
> > sometime ago. Post a request and you might get lucky.
> > Lou
> >
> > On Thu, Aug 13, 2020 at 6:02 PM <[email protected]> wrote:
> >
> > >
> > > Hi all you,
> > >
> > > I am looking some pure Copper spade lug for metrology measurements.
> > >
> > > Up now I have not found it on the web.
> > >
> > > Can you help me?
> > >
> > > Luciano
> > >
> > > Luciano P. S. Paramithiotti
> > > [email protected]
> > > www.timeok.it
> > > _______________________________________________
> > > volt-nuts mailing list -- [email protected]
> > > To unsubscribe, go to
> > > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> > > and follow the instructions there.
> > >
> > _______________________________________________
> > volt-nuts mailing list -- [email protected]
> > To unsubscribe, go to
> > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> > and follow the instructions there.
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 13 Aug 2020 14:34:45 +0200
> From: Andreas Bergmann <[email protected]>
> To: [email protected]
> Subject: Re: [volt-nuts] Spade lug
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Hi Luciano,
>
>
> On 13.08.20 10:01, [email protected] wrote:
> > I am looking some pure Copper spade lug for metrology measurements.
> >
> > Up now I have not found it on the web.
> >
> > Can you help me?
>
> Perhaps Adrian can help you:
>
> https://www.ab-precision.de/products/cables-accessories/
>
> Best regards,
>
> Mounty
>
>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 13 Aug 2020 14:52:29 +0000
> From: Tom Knox <[email protected]>
> To: "[email protected]" <[email protected]>, Discussion of precise
> voltage measurement <[email protected]>
> Subject: Re: [volt-nuts] Spade lug
> Message-ID:
> <
>
cy4pr04mb04727cb14ac36edef51a9c4bdf...@cy4pr04mb0472.namprd04.prod.outlook.com
> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Luciano;
> I have found a great source. They of copper as well as direct
> gold-plated copper. A small company JW Solutions. They manufacture spade
> specifically for metrology application.
> http://jswilley.com/
> DC Metrology Resistance Standards Temperature Thermometry Pressure
> Repair Calibration Service<http://jswilley.com/>
> DC Metrology Primary & Secondary Standards, Temperature Probes & SPRTs,
> Pressure Standards, Repair & Calibration Service Referrals, Air & Fluid
> Baths & Automated Resistance Thermometry Bridges.
> jswilley.com
>
> The owner has worked for companies such as Guildline and Measurements
> international.
> Another source is the Audiophile world. But that is more hit or miss on
> actual quality.
> Cheers;
>
> Tom Knox
>
> SR Test and Measurement Engineer
>
> Ascent Concepts and Technology
>
> 4475 Whitney Place
>
> Boulder Colorado 80305
>
> 303-554-0307
>
> [email protected]
>
> "Peace is not the absence of violence, but the presence of Justice"
> Both MLK and Albert Einstein
>
> ________________________________
> From: volt-nuts <[email protected]> on behalf of
> [email protected] <[email protected]>
> Sent: Thursday, August 13, 2020 2:01 AM
> To: [email protected] <[email protected]>
> Subject: [volt-nuts] Spade lug
>
>
> Hi all you,
>
> I am looking some pure Copper spade lug for metrology measurements.
>
> Up now I have not found it on the web.
>
> Can you help me?
>
> Luciano
>
> Luciano P. S. Paramithiotti
> [email protected]
> www.timeok.it<http://www.timeok.it>
> _______________________________________________
> volt-nuts mailing list -- [email protected]
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> and follow the instructions there.
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> volt-nuts mailing list
> [email protected]
> http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
>
>
> ------------------------------
>
> End of volt-nuts Digest, Vol 129, Issue 6
> *****************************************
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 22 Aug 2020 14:58:28 +0200
> From: Andreas Bergmann <[email protected]>
> To: [email protected]
> Subject: Re: [volt-nuts] Spade lug/Digistand 6406 manual
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Hello Luciano,
>
> On 22.08.20 14:35, [email protected] wrote:
> >
> > Thanks to all those who have also answered me directly.(spade Lugs)
> >
> > At a flea market I bought two references, one for voltage and other
> for current, Digistand 6406 and 6426 respectively. I wrote to the
> manufacturer for the manuals and he sent me the one for 6426 but he told
me
> that he did not find the one that interested me most , ie voltage
reference
> 6406. I repaired both power supplies that had shorted electrolytic
> capacitors and for one of them I had to replace the custom power
> transformer.
> >
> > Now they both work but the voltage calibrator needs to be calibrated.
> Inside are a handful of trimmers but no indication of their function.
> Calibration is not possible without manual. Extreme ratio I want to ask
you
> if any of you have this manual.
> >
> > Thank you,
> >
> > Luciano
>
>
> in 2016, quarks from the EEVBlog forum has offered exactly those two
> models.
> Perhaps he can help you with a manual.
>
>
>
https://www.eevblog.com/forum/buysellwanted/fs-burster-calibrator-(location-germany)/
>
> HTH
>
> Best regards,
>
> Mounty
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> volt-nuts mailing list
> [email protected]
> http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
>
>
> ------------------------------
>
> End of volt-nuts Digest, Vol 129, Issue 7
> *****************************************
> _______________________________________________
> volt-nuts mailing list -- [email protected]
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
> and follow the instructions there.
>
------------------------------
Subject: Digest Footer
_______________________________________________
volt-nuts mailing list
[email protected]
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
------------------------------
End of volt-nuts Digest, Vol 130, Issue 2
*****************************************
_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
