Lou,
I have seen it but outside Europe and in Australia the shipping and customs costs are prohibitive, especially for items that honestly have a very low value. Also it seems to me that the seller does not guarantee the functioning. I would also be fine with an 8505A with AC DC options. Luciano Luciano P. S. Paramithiotti [email protected] www.timeok.it Da "volt-nuts" [email protected] A [email protected] Cc Data Wed, 02 Sep 2020 12:00:04 -0400 Oggetto volt-nuts Digest, Vol 130, Issue 2 Send volt-nuts mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of volt-nuts digest..." Today's Topics: 1. Re: Fluke 8506A looking (Lou Amadio) ---------------------------------------------------------------------- Message: 1 Date: Wed, 2 Sep 2020 06:13:34 +1000 From: Lou Amadio <[email protected]> To: [email protected], Discussion of precise voltage measurement <[email protected]> Subject: Re: [volt-nuts] Fluke 8506A looking Message-ID: <caju4ahdb9-+kbe12-a+z_iee3zbebejhwqsdz5f-fbjyg4k...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" There is one in Australia https://www.ebay.com.au/itm/Fluke-8506A-Thermal-RMS-digital-multimeter/123942970490?hash=item1cdb93a47a:g:ZeIAAOSw8A1dqC5q&frcectupt=true Lou On Tue, Sep 1, 2020 at 9:46 PM <[email protected]> wrote: > > Hi, > > I am looking for a Fluke 8506A. I bought one on ebay but it came > without the AC / DC thermal converter and it didn't even work in DC. > > I kept it for spare parts but now I want one cheap. > > If you have one or you know where I can go, thank you. > > My Agilent 34401 has quite disappointed me because in ACV it is a > disaster in both low-level accuracy and frequency response. My Fluke 8502 > with the thrue rms converter in comparison is very flat 10Hz - 50kHz and > over. The HP when measuring 12V for example becomes a 5 1/2 digit while the > Fluke remains 6 1/2 digit. So my question is: considering AC DC accuracy > and stability what are the best 6.5 digits multimeters? > > have a nice day, > > Luciano > > Luciano P. S. Paramithiotti > [email protected] > www.timeok.it > > Da "volt-nuts" [email protected] > A [email protected] > Cc > Data Sat, 22 Aug 2020 12:00:02 -0400 > Oggetto volt-nuts Digest, Vol 129, Issue 7 > Send volt-nuts mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of volt-nuts digest..." > > > Today's Topics: > > 1. Spade lug/Digistand 6406 manual ([email protected]) > 2. Re: Spade lug/Digistand 6406 manual (Andreas Bergmann) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 22 Aug 2020 14:35:31 +0200 > From: [email protected] > To: [email protected] > Subject: [volt-nuts] Spade lug/Digistand 6406 manual > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > > Thanks to all those who have also answered me directly.(spade Lugs) > > At a flea market I bought two references, one for voltage and other for > current, Digistand 6406 and 6426 respectively. I wrote to the manufacturer > for the manuals and he sent me the one for 6426 but he told me that he did > not find the one that interested me most , ie voltage reference 6406. I > repaired both power supplies that had shorted electrolytic capacitors and > for one of them I had to replace the custom power transformer. > > Now they both work but the voltage calibrator needs to be calibrated. > Inside are a handful of trimmers but no indication of their function. > Calibration is not possible without manual. Extreme ratio I want to ask you > if any of you have this manual. > > Thank you, > > Luciano > > Luciano P. S. Paramithiotti > [email protected] > www.timeok.it > > Da "volt-nuts" [email protected] > A [email protected] > Cc > Data Thu, 13 Aug 2020 12:00:02 -0400 > Oggetto volt-nuts Digest, Vol 129, Issue 6 > Send volt-nuts mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of volt-nuts digest..." > > > Today's Topics: > > 1. Spade lug ([email protected]) > 2. Re: Spade lug (Lou Amadio) > 3. Re: Spade lug (Jason Watson) > 4. Re: Spade lug (Andreas Bergmann) > 5. Re: Spade lug (Tom Knox) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 13 Aug 2020 10:01:22 +0200 > From: [email protected] > To: [email protected] > Subject: [volt-nuts] Spade lug > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > > Hi all you, > > I am looking some pure Copper spade lug for metrology measurements. > > Up now I have not found it on the web. > > Can you help me? > > Luciano > > Luciano P. S. Paramithiotti > [email protected] > www.timeok.it > > > ------------------------------ > > Message: 2 > Date: Thu, 13 Aug 2020 19:57:16 +1000 > From: Lou Amadio <[email protected]> > To: [email protected], Discussion of precise voltage measurement > <[email protected]> > Subject: Re: [volt-nuts] Spade lug > Message-ID: > <caju4ahcxeostc034tkwcjo6nu5v5hv3rx92x7e7kapky4pq...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi Luciano > Try the Metrology thread on the EEVBLOG forum. There were some available > sometime ago. Post a request and you might get lucky. > Lou > > On Thu, Aug 13, 2020 at 6:02 PM <[email protected]> wrote: > > > > > Hi all you, > > > > I am looking some pure Copper spade lug for metrology measurements. > > > > Up now I have not found it on the web. > > > > Can you help me? > > > > Luciano > > > > Luciano P. S. Paramithiotti > > [email protected] > > www.timeok.it > > _______________________________________________ > > volt-nuts mailing list -- [email protected] > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > > and follow the instructions there. > > > > > ------------------------------ > > Message: 3 > Date: Thu, 13 Aug 2020 08:08:24 -0400 > From: Jason Watson <[email protected]> > To: Discussion of precise voltage measurement > <[email protected]> > Cc: [email protected] > Subject: Re: [volt-nuts] Spade lug > Message-ID: > <cajbunwq7ccpfw3_n-adz2lh24dsga8ezugnmfwkb7jawhjl...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > EDL also makes some you can order online. You can get just copper or > gold > plated over copper. > > https://www.edl-inc.com/Copper-Instrument-Lugs-25-Qty_p_51.html > > On Thu, Aug 13, 2020 at 5:58 AM Lou Amadio <[email protected]> > wrote: > > > Hi Luciano > > Try the Metrology thread on the EEVBLOG forum. There were some > available > > sometime ago. Post a request and you might get lucky. > > Lou > > > > On Thu, Aug 13, 2020 at 6:02 PM <[email protected]> wrote: > > > > > > > > Hi all you, > > > > > > I am looking some pure Copper spade lug for metrology measurements. > > > > > > Up now I have not found it on the web. > > > > > > Can you help me? > > > > > > Luciano > > > > > > Luciano P. S. Paramithiotti > > > [email protected] > > > www.timeok.it > > > _______________________________________________ > > > volt-nuts mailing list -- [email protected] > > > To unsubscribe, go to > > > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > > > and follow the instructions there. > > > > > _______________________________________________ > > volt-nuts mailing list -- [email protected] > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > > and follow the instructions there. > > > > > ------------------------------ > > Message: 4 > Date: Thu, 13 Aug 2020 14:34:45 +0200 > From: Andreas Bergmann <[email protected]> > To: [email protected] > Subject: Re: [volt-nuts] Spade lug > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8; format=flowed > > Hi Luciano, > > > On 13.08.20 10:01, [email protected] wrote: > > I am looking some pure Copper spade lug for metrology measurements. > > > > Up now I have not found it on the web. > > > > Can you help me? > > Perhaps Adrian can help you: > > https://www.ab-precision.de/products/cables-accessories/ > > Best regards, > > Mounty > > > > ------------------------------ > > Message: 5 > Date: Thu, 13 Aug 2020 14:52:29 +0000 > From: Tom Knox <[email protected]> > To: "[email protected]" <[email protected]>, Discussion of precise > voltage measurement <[email protected]> > Subject: Re: [volt-nuts] Spade lug > Message-ID: > < > cy4pr04mb04727cb14ac36edef51a9c4bdf...@cy4pr04mb0472.namprd04.prod.outlook.com > > > Content-Type: text/plain; charset="iso-8859-1" > > Hi Luciano; > I have found a great source. They of copper as well as direct > gold-plated copper. A small company JW Solutions. They manufacture spade > specifically for metrology application. > http://jswilley.com/ > DC Metrology Resistance Standards Temperature Thermometry Pressure > Repair Calibration Service<http://jswilley.com/> > DC Metrology Primary & Secondary Standards, Temperature Probes & SPRTs, > Pressure Standards, Repair & Calibration Service Referrals, Air & Fluid > Baths & Automated Resistance Thermometry Bridges. > jswilley.com > > The owner has worked for companies such as Guildline and Measurements > international. > Another source is the Audiophile world. But that is more hit or miss on > actual quality. > Cheers; > > Tom Knox > > SR Test and Measurement Engineer > > Ascent Concepts and Technology > > 4475 Whitney Place > > Boulder Colorado 80305 > > 303-554-0307 > > [email protected] > > "Peace is not the absence of violence, but the presence of Justice" > Both MLK and Albert Einstein > > ________________________________ > From: volt-nuts <[email protected]> on behalf of > [email protected] <[email protected]> > Sent: Thursday, August 13, 2020 2:01 AM > To: [email protected] <[email protected]> > Subject: [volt-nuts] Spade lug > > > Hi all you, > > I am looking some pure Copper spade lug for metrology measurements. > > Up now I have not found it on the web. > > Can you help me? > > Luciano > > Luciano P. S. Paramithiotti > [email protected] > www.timeok.it<http://www.timeok.it> > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > and follow the instructions there. > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > volt-nuts mailing list > [email protected] > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > > > ------------------------------ > > End of volt-nuts Digest, Vol 129, Issue 6 > ***************************************** > > > ------------------------------ > > Message: 2 > Date: Sat, 22 Aug 2020 14:58:28 +0200 > From: Andreas Bergmann <[email protected]> > To: [email protected] > Subject: Re: [volt-nuts] Spade lug/Digistand 6406 manual > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8; format=flowed > > Hello Luciano, > > On 22.08.20 14:35, [email protected] wrote: > > > > Thanks to all those who have also answered me directly.(spade Lugs) > > > > At a flea market I bought two references, one for voltage and other > for current, Digistand 6406 and 6426 respectively. I wrote to the > manufacturer for the manuals and he sent me the one for 6426 but he told me > that he did not find the one that interested me most , ie voltage reference > 6406. I repaired both power supplies that had shorted electrolytic > capacitors and for one of them I had to replace the custom power > transformer. > > > > Now they both work but the voltage calibrator needs to be calibrated. > Inside are a handful of trimmers but no indication of their function. > Calibration is not possible without manual. Extreme ratio I want to ask you > if any of you have this manual. > > > > Thank you, > > > > Luciano > > > in 2016, quarks from the EEVBlog forum has offered exactly those two > models. > Perhaps he can help you with a manual. > > > https://www.eevblog.com/forum/buysellwanted/fs-burster-calibrator-(location-germany)/ > > HTH > > Best regards, > > Mounty > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > volt-nuts mailing list > [email protected] > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > > > ------------------------------ > > End of volt-nuts Digest, Vol 129, Issue 7 > ***************************************** > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > and follow the instructions there. > ------------------------------ Subject: Digest Footer _______________________________________________ volt-nuts mailing list [email protected] http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com ------------------------------ End of volt-nuts Digest, Vol 130, Issue 2 ***************************************** _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there.
