[VOPRadius] Vopradius questions...

Thu, 04 Sep 2003 10:07:19 -0700

It�s possible to configure VOPRadius to do accept users based on a specific attribute wich cames with radius authentication request?
 
For example, when I receive the request there is a attribute called Connect-Info. This attribute value is different based on the service the user has.
 
Thu Sep 04 00:01:00 2003
 NAS-IP-Address = 0.0.0.0
 NAS-Port-Id = 0
 Acct-Status-Type = Start
 Framed-Protocol = PPP
 Framed-Address = 192.168.100.100
 Acct-Delay-Time = 0
 Connect-Info = "1"
 Acct-Session-Id = "8/0/0/2.584-00014354"
 Service-Type = Framed-User
 NAS-Port-Type = 16
 User-Name = "logintest"
What I need to do is allow or not a user to login based on this attribute..
 
Can I use the profile field to do that?
 
**************************************************************
Jos� Carlos Franco Jr.
Email: [EMAIL PROTECTED]
http://www.sigmanet.com.br
SIGMANET Internet Provider
Fone: 55-19-3255-3795
Fax: 55-19-3254-1194
Campinas - SP - Brasil
**************************************************************   

Reply via email to