[VOPRadius] Vopradius questions...

[Luiz Lima]

I don't know... Telemar doesn't tell us the speed and we charge the same.   -- Luiz Lima Image Link Internet http://www.imagelink.com.br ----- Original Message ----- From: Jose Franco To: [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 5:48 PM Subject: [VOPRadius] Vopradius questions... You are right.. it�s about DSL attributes...   I don�t know how Telemar works, but here Telefonica send to us an attribute called Connect-Info, and I should use it to identify if the speed the user is trying to connect is the same he�s paying.   I know VOPRadius database has a field called SpeedLimit and it uses the Connect-Info attribute to check the speed. Do you know if I can use this field to check it?   ************************************************************** Jos� Carlos Franco Jr. Email: [EMAIL PROTECTED] http://www.sigmanet.com.br SIGMANET Internet Provider Fone: 55-19-3255-3795 Fax: 55-19-3254-1194 Campinas - SP - Brasil ************************************************************** ----- Original Message ----- From: Luiz Lima To: [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 3:25 PM Subject: [VOPRadius] Vopradius questions... Actually, Jos�, no, I don't understand what you're trying to do. I assume it's somewhat related to xDSL or rented dial-up pools.   However, although we have different telcos in our states, I'm assuming that because we have problems of that nature here with xDSL provided by Telemar. They send a lot of info on each packet but VOPRADIUS can't use it.   I'm running FreeRADIUS on a Linux box to actually talk to the telco's RADIUS server. FreeRADIUS can make decisions based on those extra attributes and then modify it and send it (or not) to VPRRS.   -- Luiz Lima Image Link Internet http://www.imagelink.com.br ----- Original Message ----- From: Jose Franco To: [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 3:02 PM Subject: [VOPRadius] Vopradius questions... Hi Luiz, this is not a good thing to hear..   I think you understood what I�m trying to do.. probably you had the same problem.. do you have any idea how can I solve it, even if I have to leave VOPRADIUS?   ************************************************************** Jos� Carlos Franco Jr. Email: [EMAIL PROTECTED] http://www.sigmanet.com.br SIGMANET Internet Provider Fone: 55-19-3255-3795 Fax: 55-19-3254-1194 Campinas - SP - Brasil ************************************************************** ----- Original Message ----- From: Luiz Lima To: [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 2:50 PM Subject: [VOPRadius] Vopradius questions... Jos�,   I hope Vircom comes with something to you, but you'll probably just realize that VOPRADIUS is a dying product and, despite denials from Vircom, you won't see much improvement, if any, ever.   To bad... :-(   -- Luiz Lima Image Link Internet http://www.imagelink.com.br ----- Original Message ----- From: Jose Franco To: [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 2:06 PM Subject: [VOPRadius] Vopradius questions... It�s possible to configure VOPRadius to do accept users based on a specific attribute wich cames with radius authentication request?   For example, when I receive the request there is a attribute called Connect-Info. This attribute value is different based on the service the user has.   Thu Sep 04 00:01:00 2003  NAS-IP-Address = 0.0.0.0  NAS-Port-Id = 0  Acct-Status-Type = Start  Framed-Protocol = PPP  Framed-Address = 192.168.100.100  Acct-Delay-Time = 0  Connect-Info = "1"  Acct-Session-Id = "8/0/0/2.584-00014354"  Service-Type = Framed-User  NAS-Port-Type = 16  User-Name = "logintest" What I need to do is allow or not a user to login based on this attribute..   Can I use the profile field to do that?   ************************************************************** Jos� Carlos Franco Jr. Email: [EMAIL PROTECTED] http://www.sigmanet.com.br SIGMANET Internet Provider Fone: 55-19-3255-3795 Fax: 55-19-3254-1194 Campinas - SP - Brasil **************************************************************