Fred,

The main problem which is still lingering is the lack of direct confirmation about the low power input, and the lack of a schematic. This could relate to being 'holiday' season in Europe.

But when you look at the test reports, when JLN runs the device on full DC power, he is able to input 1324 watts, which seemingly couldn't happen if this power was all going to a filament with a resistance higher than an ohm.

Plus even then (full DC) he is getting out only 70% of the input as heat - where is the rest of the heat going? Conversely if George Holz's theory about the power measurments were correct, when he was using the 50 % duty in the early testing but yet the OU was still strong even if you double the input power- or when he went to 5% but was getting only 5-1 OU , then it should have been 20-1 even then and not 5-1, so George's objection is also a little shaky from that standpoint - if the reciprocal of the duty is the measurement problem - the point being that ,there seems to be little way to logically account for all this.

I suspect that shortly, in a few weeks hopefully, independent testing will either confirm his results, or relegate MAHG to the category of yet another false alarm ....



Summing up the MAHG parameters:

300 K fill pressure 80 Torr

Filament:  2.5E-4 meters dia x 0.1 meters long
~0.1 ohms @ 300 K   ~1.13 ohms @ 2000 K

Filament Power Aprox.   127 watts @  2000 K   (12 Volts D.C.)
Filament Power Aprox 6.4 watts @ 5% duty cycle.  Temp < 2000 K ?

Aprox. MAHG volume 500 cm^3
Number of H2 molecules in chamber ~ 1.42E21
H2 Molecular Radius 1.16E-10 meters
H2 Molecule Collision Mean Free Path  (MFP) ~ 1.1E-6 Meters *
Aprox. temperature per H2 molecule @ 100 watts, 0.44 eV or 5,120 Deg K
H2 Molecular Velocity @  300 K   ~ 1.58E3 meters per second
H2 Molecular Velocity @  5,120 deg K ~ 6.52E3 meters per second
H2-H2 Molecular Collision Frequency @ 300 K  ~ 1.43E9 per second
H2- H2 Molecular Collision Frequency @ 5,120 deg K ~ 6.0E9 per second

* MFP Based on CRC Handbook Data: 8.81E-5 Meters @ 1.0 Torr for H2

Does the Casimir Force "track" the ZPE frequency?

Frederick

Reply via email to