It is possible that the powder of dust under discussion is produced by the LENR device. It is also possible that both Radon and the LENR device are producing reactive dust.
The LENR dust could be metalized hydrogen that is not properly confined by the LENR device. There have been experiments that have checked how to confined LENR reactive dust. In terms of confinement, steel works and aluminum does not confine this LENR dust. The wire reactor is confined using quartz. This experiment should be done using steel confinement. It is possible that when very hot hydrogen will pass through steel. On Thu, Mar 10, 2016 at 2:43 PM, Jones Beene <jone...@pacbell.net> wrote: > -----Original Message----- > From: H LV > >> Since the apparatus was not enclosed in a calorimeter, Thermacore's estimate >> for excess heat production depends on the assumption that the "heat loss to >> the environment" is the same for the calibration runs and the active runs. > > Yes, but that parameter can be accurately controlled and measured by skilled > experts. > > Thermacore is possibly the leading expert in the world at heat measurement. > They invented the heat pipe, for instance. Thermal engineering is their > specialty. >
