Jones wrote. Build-your-own Joe Cell:
http://educate-yourself.org/fe/fejoewatercell.shtml Why you don't want "Magnetic" materials.in your Orgone Accumulator. 316 Stainless Steel Alloys: Chemical Formula Fe, <0.03% C, 16-18.5% Cr, 10-14% Ni, 2-3% Mo, <2% Mn, <1% Si, <0.045% P, <0.03% S http://www.azom.com/details.asp?ArticleID=863#_Composition 304 SS Alloys: Chemical Formula Fe, <0.08% C, 17.5-20% Cr, 8-11% Ni, <2% Mn, <1% Si, <0.045% P, <0.03% S http://www.azom.com/details.asp?ArticleID=965#_Composition Why High Implosion Energy Density can tap ZPE. 1, Same way implosion-collapse of cavitation/sonofusion bubbles create High Implosion Energy Density by tapping ZPE. 2, Same way High Energy Density in Capacitors can "condense" ZPE. > [Original Message] > From: Jones Beene <[EMAIL PROTECTED]> > To: vortex <[email protected]> > Date: 4/17/2006 9:31:16 AM > Subject: Re: Muonium > > Following insightful private email on the Joe Cell device, here is > more detail regarding the key claimed feature - "implosion" : > > RvS: "I assume you are referring to the fact that they adjust the > timing to close to bottom dead center, then claim that the motor > is driven by implosion." > > Yes but it is too bad that the anecdotes are not in agreement on > these details, so one must surmise on the general modality based > on incomplete and conflicting reports. > > Note also that "implosion" has also been said (in a totally > different line of experiments) to be a key feature of "Brown's > gas". The more correct accounting for this phenomenon is that : in > "common manifold" electrolysis (i.e. mixed lean H2 laced gas), > there can be a brief and colorless "explosion," followed > immediately by a more easily discernable "implosion" - such that > the observer comes away with the sensory impression of an > implosion-only - in circumstances where very lean hydrogen is > exploded. > Snip for Brevity. > > Jones
