On 7/30/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Well here's the setup: http://www.geocities.com/terry1094/JC_Setup_small.JPG It's being fired by a wall wart rated at 6VDC which is actually putting out 9VDC with considerable ripple.
9.15 VDC and steady. 21.7 mVAC according to my digital meter. I'm using the analog meter for the current measurement. Which, by the way, dropped to 1.3 mV at 1:30 pm EDT.
PS Interesting note: After about 10 min., the only bubble formation was on the anode near the base at the teflon. Aggregrated microbubbles?
Not only are they forming on the bottom near the anode; but, they are also forming on the vertical pan surface on the anode side. Nothing evident near the cathode. Terry
