Hi,
On 10-5-2011 1:42, Roarty, Francis X wrote:
So Rossi let us go ahead and think the cu was outside the SS reactor
while it was actually the sealed inner reactor filled with Ni powder
and a resistive heater. Water flows around the copper reactor inside a
SS jacket. The SS is a jacket not a reactor!
I think you are wrong.
First there is the inner SS chamber with one opening at the top where H2
and Ni can be added.
Second there is the copper vessel around it were the cold water flows in
and steam flows out through the chimney.
Third there is the SS clamp to hold the external heater very close
against the copper vessel.
Looking once again at the photos one can only say these are very cheap
parts which are usually used for plumbing and for Central Heating, with
probably the only exception of the inner SS chamber, which is possibly
milled by a computer-driven workbench.
This is what I see in the drawings from the 22passi blog AND the photos
taken during the tests with K&E.
Kind regards,
MoB
