Today (June 26, 2013)...
http://www.quantumheat.org/index.php/en/follow/follow-2/295-simultaneous-test-runs-eu-us Update 18:15 UTC - Both the EU Cells and the US Cells were switched on and BOTH indicated excess energy as the cells came to equilibrium at higher temperatures than during the calibration tests. The EU cell with the active wire was indicating up to 2.5W of excess power over the 30.4W input power (~6% excess). That is well above the 95% confidence limits for that cell (~0.25W). The US Cell was indicating approximately 1.4 watts excess, again, well above the ~0.5W confidence interval. Very exciting to see something positive and especially simultaneous. The indicated excess seems to be corroborated by several cell temperatures higher than calibration values. The control cells in each location are performing at or below calibration values. The internal cell temperatures seem to be slowly degrading, but the external cell temperatures are holding steady. The resistance of the active wires is slowly rising as, presumably, the hydrogen is leaving into the vacuum. The EU cell has been cycled already, leading to the the active wire "unloading" and rising up to a higher resistance than the wire had originally.
