I have posted the cross-section of the hotCat as I have surmised it to be constructed. The active medium is entirely in a hermetically sealed stainless coaxial tube arrangement. The reactor vessel itself IS the Faraday cage. It is not a part of the test, it is a part of the hotCat.
Bob Higgins On Thu, Oct 2, 2014 at 6:21 PM, Axil Axil <janap...@gmail.com> wrote: > How do you know that a faraday cage is part of the test? > > On Thu, Oct 2, 2014 at 5:25 PM, Bob Higgins <rj.bob.higg...@gmail.com> > wrote: > >> The 3.6 keV x-ray photons are easily detected with an x-ray spectrometer >> such as the Amptek X-123SDD at >> http://www.amptek.com/products/x-123sdd-complete-x-ray-spectrometer-with-silicon-drift-detector-sdd/ >> . See their chart at this URL for the different window options that will >> easily allow detection down to 1 keV: >> http://www.amptek.com/products/c-series-low-energy-x-ray-windows/ . I >> am hoping to get one of these some day. >> >> The bigger issue is that not much will make it out of the hotCat even if >> that is the primary channel for conveying the heat. >> >> In the case of RF, I would expect almost none to escape the hotCat >> because the reaction is in a Faraday cage. The RF that could penetrate >> would have to be below 1 kHz. >> >>