If Rossi has a problem with harmonics and or reactive power, he has better to rethink his electrical circuit. Nowadays, rectifying AC to DC and then again hash it to make AC is common circuits. The harmonics and the reactive power can easily be managed, if the main circuit is designed right. As we say in French,Il met un emplâtre sur une jambe de bois. He is using 30 years old solutions for a bad designed circuit.
In the Lugano report page 5, there are 3 coils inside the eCat. At one time, one and only one coil is on while the 2 others are off. It is not possible to have 2 on and 1 off. So I dont understand the speculation. Alain, could you explain more? _____ From: [email protected] [mailto:[email protected]] On Behalf Of Alain Sepeda Sent: lundi 3 novembre 2014 22:51 To: Vortex List Subject: Re: [Vo]: New Rossi lab photo has much information an idea to check from the surprising claim in the report that one of the wire effective current was abo the sum of the (equals) two others... after some rethinking, this imply all current are synchronous... this is a monophase devices, with simply 2 coils... what for ? only speculation that it may just make some thermal oscillations from left to right, or center to extremities, or else stabilize center and extremities... anyway the two currents are quite similar... note that this monophase current maybe the result of a triphase dimmer, switching various phases to reduce deforming power and increase frequency (to help filtering, and phase balance, when used by 3)... what looks as complexity is simply classical electric power engineering... for the 100-200kWe used by the 1MWth power plant, this may be a hell to control phase and harmonics and reduce deforming and reactive power... electric companies bill you for that, and can even ban you if you inject that mess in the grid. 2014-11-03 19:10 GMT+01:00 Arnaud Kodeck <[email protected]>: Bob, Nice analysis. The eCats are configured in star or triangle. I think from what analysed is that it is a star with a free neutral. This could be also disinformation. This configuration might have never worked at all and be published one year later to lead the replicator in the wrong direction. Arnaud _____ From: Bob Higgins [mailto:[email protected]] Sent: lundi 3 novembre 2014 15:49 To: [email protected] Subject: [Vo]: New Rossi lab photo has much information Bob Greenyer of MFMP just posted this image of Rossi's lab with 3 hotCats being tested and I put it on my Google drive: https://drive.google.com/file/d/0B5Pc25a4cOM2U3FIWmpCMnlZaFE/view?usp=sharin g A wealth of information can be gleaned from this: * Rossi is testing 3 hotCats simultaneously. * Each hotCat is connected with 2-wires only - Each IS CONNECTED SINGLE PHASE! This probably means that the hotCat only relies on heat-up, not magnetic field interaction - certainly not rotating field interaction. * The gray box has 3 thermocouple connections with one going to each hotCat * The gray box controller is controlling the energy to all 3 hotCats via the red 3-phase SCR controller in such a way as to control the temperature of each hotCat independently. * This gray box controller is designed to control each hotCat solely based on 1 temperature measurement per hotCat. The temperature controllers mounted on the gray box are probably each controlling the setpoint of each hotCat (I.E. they are not being used just as temperature meters). A microcontroller in the gray box may read each meter (RS232) and then sets the SCR angle for that phase to control the power to each hotCat. * The red SCR box may be configured for delta SCR configuration for easy control of the individual hotCats, in which case a microprocessor would not be needed. Each of the little PID temperature controller panel meters could directly control the corresponding SCR in the delta phase configuration. Even if the red box had y-configured SCRs, they probably could be controlled with the panel temperature controllers with simple logic. * Replication need not use a 3-phase heater coil inside the hotCat because there is no need to simulate an industrial environment. Replication just got easier. Basically each hotCat is just a small temperature regulated mini-tube furnace. It would be possible to design the replica to operate on ordinary US 120VAC, even with a 15A outlet using a triac dimmer with an inexpensive PID temperature controller from eBay. Bob Higgins
