I have been trying to get X configured for several days, and I can't get through this problem.
I am using xfree86 3.3.6, redhat 6.2, w/ a chips & technologies ct69000, which I believe uses some type of frame buffer. When I run XConfigurator, it recognizes the ct69000 fine. When I enter my monitor type, and it tests itself, the screen doesn't come up, and it says something about a problem w/ the configuration, and backs up. But, it I enter a custom monitor, w/ some conservative values it does come up OK, and I can finish Xconfigurator. Then I do startx > foo 2>&1 It comes into X, and brings up a few apps. But, the resolution looks like 640x480, or less. It looks like I am just seeing the upper left corner of the screen, and can't get to the icons and task bar down at the bottom. My log file says I am at 1024x768, but, NOT! Note, I am using an embedded board we had built for a project. But I had the same board runnig fine w/ RedHat 7.2, so I don't think there is a hardware problem. I downloaded the latest source for xfree86 and built it. Should I go to version 4xxx? Is that a lot of trouble? I don't want to, because we are developing an embedded product, and the older X is probably smaller. Any help would be greatly appreciated. _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
