begin Peter Jay Salzman <[EMAIL PROTECTED]> > begin Richard Burkhart <[EMAIL PROTECTED]> > > Heyyaz ... > > > > Anyone have a bottle of Excedrine TCP/IP? ... (cough, cough) ok, that was a > > bad one ... > > > > I've got a new debian install (on a P200, 64megs ram, 3Com 3C905 NIC, > > yadda,yadda) that I'm installing Woody (w) the 2.4 kernel (have also tried > > 2.2) onto. Everything works all right when installing off of the CD. I > > have the NIC card model, and when I select the driver, it goes through ok. > > > > Then the machine reboots. "ifconfig" shows the IP, netmask, gateway, etc. > > are working as I entered it. The DNS's are in properly. I can ping the > > card, and 127.0.0.1. The card DOES work - it worked on the same machine > > under RedHat and a Knoppix demo CD. > > > > But I can't get out onto the net ... I can't ping outbound - either through > > domains, or pinging an IP. I also can't ping INTO the box, from another > > machine on the same 192.168 net. > > > > I've wandered through debianhelp.org, the vox-tech archives, and asked > > around ... no ideas so far. I'm running out of hair to pull out, like I > > ever had much to begin with. > > > > Any idearz? > > have you used tcpdump yet?
in case you haven't used tcpdump: tcpdump -i eth0 will dump all inbound/outbound traffic on the nic. once you start using advanced functionality, the syntax stinks. but just monitoring traffic is easy enough. :) > can you post lsmod/ifconfig/route info? also, i forgot to ask -- are you going through any kind of firewall, proxy or masquerade? pete -- Fingerprint: B9F1 6CF3 47C4 7CD8 D33E 70A9 A3B9 1945 67EA 951D _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
