I think I would need a bit more info to even start on this one. I had some issues with eth0 on my box when installing woody, but I did manage to fix it. How many interfaces? How are they set up? DHCP? Static?
Mike ----- Original Message ----- From: "Richard Burkhart" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 29, 2002 6:35 PM Subject: [vox-tech] Debian Woody new install - eth0 issues - what am I doing wrong? > Heyyaz ... > > Anyone have a bottle of Excedrine TCP/IP? ... (cough, cough) ok, that was a > bad one ... > > I've got a new debian install (on a P200, 64megs ram, 3Com 3C905 NIC, > yadda,yadda) that I'm installing Woody (w) the 2.4 kernel (have also tried > 2.2) onto. Everything works all right when installing off of the CD. I > have the NIC card model, and when I select the driver, it goes through ok. > > Then the machine reboots. "ifconfig" shows the IP, netmask, gateway, etc. > are working as I entered it. The DNS's are in properly. I can ping the > card, and 127.0.0.1. The card DOES work - it worked on the same machine > under RedHat and a Knoppix demo CD. > > But I can't get out onto the net ... I can't ping outbound - either through > domains, or pinging an IP. I also can't ping INTO the box, from another > machine on the same 192.168 net. > > I've wandered through debianhelp.org, the vox-tech archives, and asked > around ... no ideas so far. I'm running out of hair to pull out, like I > ever had much to begin with. > > Any idearz? > > > _______________________________________________ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech > _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
