on Sun, Jan 12, 2003 at 08:28:14AM -0800, Richard S. Crawford ([EMAIL PROTECTED]) wrote: > > WD has separate jumper configurations for: > > > > - Master (single disk) > > - Master (with slave disk) > > - Slave (with master disk) > > > > AFAIK, it is not possible to run WD drives as slave, without a master > > disk present. > > > > Double-check your jumper settings on both the slave *and* the master > > drives. > > Yup, done that. I'm thinking about setting them both on cable select > now and seeing if that does any good.
I'd suggest a triple-check on that. Note that the setting which works for a standalone drive *doesn't* work for one paired with a slave. Also: try booting with all combinations of drives connected: master only, slave only, and both. > > Yes, I've been bit by this one, it's a PITA. > > PITA? Middle-eastern baked good, very tasty with hummus, falafel, or gyros. Also "pain in the ass". Peace. -- Karsten M. Self <[EMAIL PROTECTED]> http://kmself.home.netcom.com/ What Part of "Gestalt" don't you understand? Geek for hire: http://kmself.home.netcom.com/resume.html _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
