I think I've figured this one out... more details forthcoming...
On Sun, 2003-01-12 at 16:32, Karsten M. Self wrote: > on Sun, Jan 12, 2003 at 08:28:14AM -0800, Richard S. Crawford >([EMAIL PROTECTED]) wrote: > > > WD has separate jumper configurations for: > > > > > > - Master (single disk) > > > - Master (with slave disk) > > > - Slave (with master disk) > > > > > > AFAIK, it is not possible to run WD drives as slave, without a master > > > disk present. > > > > > > Double-check your jumper settings on both the slave *and* the master > > > drives. > > > > Yup, done that. I'm thinking about setting them both on cable select > > now and seeing if that does any good. > > I'd suggest a triple-check on that. Note that the setting which works > for a standalone drive *doesn't* work for one paired with a slave. > > Also: try booting with all combinations of drives connected: master > only, slave only, and both. > > > > Yes, I've been bit by this one, it's a PITA. > > > > PITA? > > Middle-eastern baked good, very tasty with hummus, falafel, or gyros. > Also "pain in the ass". > > Peace. -- Richard S. Crawford <[EMAIL PROTECTED]> _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
