I found the /etc/X11/XF86Config file and edited a few times. Here is the most recent one that I tried:
Section "Screen"
Identifier "Screen0"
Device "VideoCard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" EndSubsection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
When I restart X, I don't get any errors but the screen is still the same size.
Is there a tool I can use to figure out the amount of video RAM or do I have to look for manuals that might list that?
Thanks for all the help,
Jennifer
Jonathan McPherson wrote:
Jennifer,
Yes it is an LCD monitor. I tried running xvidtune and got the message
"Video are not settable on this chip". If I check the control center,
it says that the screen size is 640x480 and has no other options for
it. How else can I up the resolution?
The first thing I would try is to follow the other poster's suggestion and manually edit the configuration file.
However, if that doesn't work, you may be running into the same problem I have had with my LCD monitor: XFree believes that you can't support a higher resolution because it doesn't have the right specs on your monitor and video card.
You need to tell xfree that your monitor has a very high range of horizontal and vertical synch frequencies, and that your video card has at least as much video RAM as it actually does. XFree will not allow you to change to a resolution that it (a) doesn't think your monitor can handle or (b) doesn't think you have the video memory to maintain.
You can do this in the configuration file mentioned by the other poster--the places on the file that you need to make the changes should be obvious.
-jam _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
_______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
